Appendix H
NetBIOS Filter Commands
The following describes the NetBIOS packet filter commands.
Introduction
NetBIOS (Network Basic Input/Output System) are TCP or UDP broadcast packets that enable a computer to connect to and communicate with a LAN.
For some
You can configure NetBIOS filters to do the following:
•Allow or disallow the sending of NetBIOS packets from the LAN to the WAN and from the WAN to the LAN.
•Allow or disallow the sending of NetBIOS packets through VPN connections.
•Allow or disallow NetBIOS packets to initiate calls.
Display NetBIOS Filter Settings
Syntax: sys filter netbios disp
This command gives a
NetBIOS Display Filter Settings Command Example
=========== NetBIOS Filter Status ===========
Between LAN and WAN: Block
IPSec Packets: Forward
Trigger Dial: Disabled
Appendix H | 335 |