Figure 133 Static Route
The following table describes the labels in this screen.
Table 91 Static Route
LABEL | DESCRIPTION |
|
|
# | This is the number of an individual static route. |
|
|
Active | This field shows whether this static route is active (Yes) or not (No). |
|
|
Name | This is the name that describes or identifies this route. |
|
|
Destination | This parameter specifies the IP network address of the final destination. Routing is |
| always based on network number. |
Gateway | This is the IP address of the gateway. The gateway is a router or switch on the same |
| network segment as the device's LAN or WAN port. The gateway helps forward |
| packets to their destinations. |
Subnet Mask | This is the subnet mask of the static route. |
|
|
Modify | Click the edit icon to go to the screen where you can set up a static route on the |
| ZyXEL Device. |
| Click the delete icon to remove a static route from the ZyXEL Device. A window |
| displays asking you to confirm that you want to delete the route. |
Select a static route index number and click Edit. The screen shown next appears. Use this screen to configure the required information for a static route.
232 | Chapter 14 Static Route |