P-661H/HW Series User’s Guide

The following table describes the fields in this screen.

Table 116 View Log

LABEL

DESCRIPTION

 

 

Display

The categories that you select in the Log Settings screen display in the drop-down

 

list box.

 

Select a category of logs to view; select All Logs to view logs from all of the log

 

categories that you selected in the Log Settings page.

Time

This field displays the time the log was recorded.

 

 

Message

This field states the reason for the log.

 

 

Source

This field lists the source IP address and the port number of the incoming packet.

 

 

Destination

This field lists the destination IP address and the port number of the incoming

 

packet.

Notes

This field displays additional information about the log entry.

 

 

Email Log Now

Click Email Log Now to send the log screen to the e-mail address specified in the

 

Log Settings page (make sure that you have first filled in the E-mail Log Settings

 

fields in Log Settings).

Refresh

Click Refresh to renew the log screen.

 

 

Clear Log

Click Clear Log to delete all the logs.

 

 

20.3 Configuring Log Settings

Use the Log Settings screen to configure to where the ZyXEL Device is to send logs; the schedule for when the ZyXEL Device is to send the logs and which logs and/or immediate alerts the ZyXEL Device is to record. See Section 20.1 on page 281 for more information.

To change your ZyXEL Device’s log settings, click Maintenance > Logs > Log Settings. The screen appears as shown.

Alerts are e-mailed as soon as they happen. Logs may be e-mailed as soon as the log is full. Selecting many alert and/or log categories (especially Access Control) may result in many e- mails being sent.

282

Chapter 20 Logs