ZyXEL Communications P-661HW Table 78 VPN Setup, Figure 121 VPN Setup

P-661H/HW Series User’s Guide

Figure 121 VPN Setup

The following table describes the fields in this screen.

Table 78 VPN Setup

LABEL	DESCRIPTION
No.	This is the VPN policy index number. Click a number to edit VPN policies.
Active	This field displays whether the VPN policy is active or not. A Yes signifies that this
	VPN policy is active. No signifies that this VPN policy is not active.
Name	This field displays the identification name for this VPN policy.
Local Address	This is the IP address(es) of computer(s) on your local network behind your ZyXEL
	Device.
	The same (static) IP address is displayed twice when the Local Address Type field
	in the VPN-IKE(or VPN-Manual Key) screen is configured to Single.
	The beginning and ending (static) IP addresses, in a range of computers are
	displayed when the Local Address Type field in the VPN-IKE (or VPN-Manual Key)
	screen is configured to Range.
	A (static) IP address and a subnet mask are displayed when the Local Address
	Type field in the VPN-IKE(or VPN-Manual Key) screen is configured to Subnet.
Remote	This is the IP address(es) of computer(s) on the remote network behind the remote
Address	IPSec router.
	This field displays N/A when the Secure Gateway Address field displays 0.0.0.0. In
	this case only the remote IPSec router can initiate the VPN.
	The same (static) IP address is displayed twice when the Remote Address Type
	field in the VPN-IKE(or VPN-Manual Key) screen is configured to Single.
	The beginning and ending (static) IP addresses, in a range of computers are
	displayed when the Remote Address Type field in the VPN-IKE (or VPN-Manual
	Key) screen is configured to Range.
	A (static) IP address and a subnet mask are displayed when the Remote Address
	Type field in the VPN-IKE(or VPN-Manual Key) screen is configured to Subnet.
Encap.	This field displays Tunnel or Transport mode (Tunnel is the default selection).
IPSec Algorithm	This field displays the security protocols used for an SA.
	Both AH and ESP increase ZyXEL Device processing requirements and
	communications latency (delay).
Secure Gateway	This is the static WAN IP address or URL of the remote IPSec router. This field
IP	displays 0.0.0.0 when you configure the Secure Gateway Address field in the VPN-
	IKE screen to 0.0.0.0.

206 Chapter 13 VPN Screens