Chapter 9 VLAN
Table 18 | Advanced Application > VLAN > Static VLAN (continued) | |
LABEL |
| DESCRIPTION |
Control |
| Select Normal for the port to dynamically join this VLAN group using |
|
| GVRP. This is the default selection. |
|
| Select Fixed for the port to be a permanent member of this VLAN group. |
|
| Select Forbidden if you want to prohibit the port from joining this VLAN |
|
| group. |
|
|
|
Tagging |
| Select TX Tagging if you want the port to tag all outgoing frames |
|
| transmitted with this VLAN Group ID. |
|
|
|
Add |
| Click Add to save your changes to the Switch’s |
|
| Switch loses these changes if it is turned off or loses power, so use the |
|
| Save link on the top navigation panel to save your changes to the non- |
|
| volatile memory when you are done configuring. |
|
|
|
Cancel |
| Click Cancel to begin configuring this screen afresh. |
|
|
|
Clear |
| Click Clear to start configuring the screen again. |
|
|
|
VID |
| This field displays the ID number of the VLAN group. Click the number to |
|
| edit the VLAN settings. |
|
|
|
Active |
| This field indicates whether the VLAN settings are enabled (Yes) or |
|
| disabled (No). |
|
|
|
Name |
| This field displays the descriptive name for this VLAN group. |
|
|
|
Delete |
| Click Delete to remove the selected entry from the summary table. |
|
|
|
Cancel |
| Click Cancel to clear the Delete check boxes. |
|
|
|
9.5.4 Configure VLAN Port Settings
Use the VLAN Port Setting screen to configure the static VLAN (IEEE 802.1Q) settings on a port. See Section 9.1 on page 117 for more information on static VLAN. Click the VLAN Port Setting link in the VLAN Status screen.
Figure 42 Advanced Application > VLAN > VLAN Port Setting
124 |
| |
| ||
|
|
|