Chapter 37 OSPF
Table 116 | OSPF Status: Common Output Fields (continued) | |
FIELD |
| DESCRIPTION |
Age |
| This field displays the time (in seconds) since the last LSA was sent. |
|
|
|
Seq # |
| This field displays the link sequence number of the LSA. |
|
|
|
Checksum |
| This field displays the checksum value of the LSA. |
|
|
|
Link Count |
| This field displays the number of links in the LSA. |
|
|
|
37.3 OSPF Configuration
Use this screen to activate OSPF and set general settings. Click IP Application > OSPF and the Configuration link to display the OSPF Configuration screen. See Section 37.1 on page 331 for more information on OSPF.
Figure 162 IP Application > OSPF Configuration: Activating and General Settings
The follow table describes the related labels in this screen.
Table 117 IP Application > OSPF Configuration: Activating and General Settings
LABEL | DESCRIPTION |
Active | OSPF is disabled by default. Select this option to enable it. |
|
|
Router ID | Router ID uniquely identifies the Switch in an OSPF. Enter a unique ID (that |
| uses the format of an IP address in dotted decimal notation) for the Switch. |
|
|
336 |
| |
| ||
|
|
|