Chapter 24 Multicast
24.8 MVR Group Configuration
All source ports and receiver ports belonging to a multicast group can receive multicast data sent to this multicast group.
Configure MVR IP multicast group address(es) in the Group Configuration screen. Click Group Configuration in the MVR screen.
Note: A port can belong to more than one multicast VLAN. However, IP multicast group addresses in different multicast VLANs cannot overlap.
Figure 105 Advanced Application > Multicast > Multicast Setting > MVR: Group Configuration
The following table describes the labels in this screen.
Table 67 Advanced Application > Multicast > Multicast Setting > MVR: Group Configuration
LABEL | DESCRIPTION |
Multicast | Select a multicast VLAN ID (that you configured in the MVR screen) from |
VLAN ID | the |
|
|
Name | Enter a descriptive name for identification purposes. |
|
|
Start | Enter the starting IP multicast address of the multicast group in dotted |
Address | decimal notation. |
| Refer to Section 24.1.1 on page 227 for more information on IP multicast |
| addresses. |
|
|
End Address | Enter the ending IP multicast address of the multicast group in dotted |
| decimal notation. |
| Enter the same IP address as the Start Address field if you want to |
| configure only one IP address for a multicast group. |
| Refer to Section 24.1.1 on page 227 for more information on IP multicast |
| addresses. |
|
|
| 239 |
|
|