Chapter 19 Port Security
19.2 Port Security Setup
Click Advanced Application > Port Security in the navigation panel to display the screen as shown.
Figure 85 Advanced Application > Port Security
The following table describes the labels in this screen.
Table 47 Advanced Application > Port Security
LABEL | DESCRIPTION |
Port List | Enter the number of the port(s) (separated by a comma) on which you |
| want to enable port security and disable MAC address learning. After you |
| click MAC freeze, all previously learned MAC addresses on the specified |
| port(s) will become static MAC addresses and display in the Static MAC |
| Forwarding screen. |
|
|
MAC freeze | Click MAC freeze to have the Switch automatically select the Active |
| check boxes and clear the Address Learning check boxes only for the |
| ports specified in the Port list. |
|
|
Active | Select this option to enable port security on the Switch. |
|
|
Port | This field displays a port number. |
|
|
* | Settings in this row apply to all ports. |
| Use this row only if you want to make some of the settings the same for |
| all ports. Use this row first to set the common settings and then make |
| adjustments on a |
| Note: Changes in this row are copied to all the ports as soon as you |
| make them. |
|
|
198 |
| |
| ||
|
|
|