Chapter 26 IP Source Guard
26.6.1 ARP Inspection VLAN Status
Use this screen to look at various statistics about ARP packets in each VLAN. To open this screen, click Advanced Application > IP Source Guard > ARP Inspection > VLAN Status.
Figure 124 ARP Inspection VLAN Status
The following table describes the labels in this screen.
Table 84 ARP Inspection VLAN Status
LABEL | DESCRIPTION |
Show VLAN range | Use this section to specify the VLANs you want to look at in the |
| section below. |
|
|
Enabled VLAN | Select this to look at all the VLANs on which ARP inspection is enabled |
| in the section below. |
|
|
Selected VLAN | Select this to look at all the VLANs in a specific range in the section |
| below. Then, enter the lowest VLAN ID (Start VID) and the highest |
| VLAN ID (End VID) you want to look at. |
|
|
Apply | Click this to display the specified range of VLANs in the section below. |
|
|
VID | This field displays the VLAN ID of each VLAN in the range specified |
| above. |
|
|
Received | This field displays the total number of ARP packets received from the |
| VLAN since the Switch last restarted. |
|
|
Request | This field displays the total number of ARP Request packets received |
| from the VLAN since the Switch last restarted. |
|
|
Reply | This field displays the total number of ARP Reply packets received |
| from the VLAN since the Switch last restarted. |
|
|
Forwarded | This field displays the total number of ARP packets the Switch |
| forwarded for the VLAN since the Switch last restarted. |
|
|
Dropped | This field displays the total number of ARP packets the Switch |
| discarded for the VLAN since the Switch last restarted. |
|
|
| 275 |
|
|