Chapter 31 PPPoE

 

Table 102 Advanced Application > PPPoE > Intermediate Agent > Port > VLAN

 

LABEL

DESCRIPTION

 

Remote-id

Enter a string of up to 63 ASCII characters that the Switch adds into the

 

 

Agent Remote ID sub-option for this VLAN on the specified port. Spaces

 

 

are allowed.

 

 

If you do not specify a string here or in the Remote-idfield for a specific

 

 

port, the Switch automatically uses the PPPoE client’s MAC address.

 

 

The Remote ID you configure here has the highest priority.

 

 

 

 

Apply

Click Apply to save your changes to the Switch’s run-time memory. The

 

 

Switch loses these changes if it is turned off or loses power, so use the

 

 

Save link on the top navigation panel to save your changes to the non-

 

 

volatile memory when you are done configuring.

 

 

 

 

Cancel

Click Cancel to begin configuring this screen afresh.

 

 

 

31.3.3 PPPoE IA for VLAN

Use this screen to set whether the PPPoE Intermediate Agent is enabled on a VLAN and whether the Switch appends the Circuit ID and/or Remote ID to PPPoE discovery packets from a specific VLAN.

Click the VLAN link in the Intermediate Agent screen to display the screen as shown.

Figure 147 Advanced Application > PPPoE > Intermediate Agent > VLAN

 

307

XGS-4526/4528F/4728F User’s Guide