Chapter 5 Initial Setup Example
new IP interface. This allows the Switch to route traffic between the RD and Sales networks.
Figure 24 Initial Setup Network Example: IP Interface
1Connect your computer to the MGMT port that is used only for management. Make sure your computer is in the same subnet as the MGMT port.
2Open your web browser and enter 192.168.0.1 (the default MGMT port IP address) in the address bar to access the web configurator. See Section 4.2 on page 47 for more information.
3Click Basic Setting and IP Setup in the navigation panel.
4Configure the related fields in the IP Setup screen.
EXAMPLE
For the Sales network, enter 192.168.2.1 as the IP address and 255.255.255.0 as the subnet mask.
58 |
| |
| ||
|
|
|