12
Filtering
This chapter discusses MAC address port filtering.
12.1 Configure a Filtering Rule
Configure the Switch to filter traffic based on the traffic’s source, destination MAC addresses and/or VLAN group (ID).
Click Advanced Application > Filtering in the navigation panel to display the screen as shown next.
Figure 55 Advanced Application > Filtering
The following table describes the related labels in this screen.
Table 25 Advanced Application > FIltering
LABEL | DESCRIPTION |
Active | Make sure to select this check box to activate your rule. You may |
| temporarily deactivate a rule without deleting it by deselecting this check |
| box. |
|
|
Name | Type a descriptive name (up to 32 printable ASCII characters) for this rule. |
| This is for identification only. |
|
|
| 145 |
|
|