Chapter 26 IP Source Guard
26.6.2 ARP Inspection Log Status
Use this screen to look at log messages that were generated by ARP packets and that have not been sent to the syslog server yet. To open this screen, click Advanced Application > IP Source Guard > ARP Inspection > Log Status.
Figure 125 ARP Inspection Log Status
The following table describes the labels in this screen.
Table 85 ARP Inspection Log Status
LABEL | DESCRIPTION |
Clearing log status | Click Apply to remove all the log messages that were generated |
table | by ARP packets and that have not been sent to the syslog server |
| yet. |
|
|
Total number of logs | This field displays the number of log messages that were |
| generated by ARP packets and that have not been sent to the |
| syslog server yet. If one or more log messages are dropped due |
| to unavailable buffer, there is an entry called overflow with the |
| current number of dropped log messages. |
|
|
Index | This field displays a sequential number for each log message. |
|
|
Port | This field displays the source port of the ARP packet. |
|
|
VID | This field displays the source VLAN ID of the ARP packet. |
|
|
Sender Mac | This field displays the source MAC address of the ARP packet. |
|
|
Sender IP | This field displays the source IP address of the ARP packet. |
|
|
Num Pkts | This field displays the number of ARP packets that were |
| consolidated into this log message. The Switch consolidates |
| identical log messages generated by ARP packets in the log |
| consolidation interval into one log message. You can configure |
| this interval in the ARP Inspection Configure screen. See |
| |
|
|
276 |
| |
| ||
|
|
|