|
|
| Chapter 42 VRRP |
| Table 137 | IP Application > VRRP Configuration > VRRP Parameters (continued) | |
| LABEL |
| DESCRIPTION |
| Add |
| Click Add to save your changes to the Switch’s |
|
|
| The Switch loses these changes if it is turned off or loses power, so |
|
|
| use the Save link on the top navigation panel to save your changes |
|
|
| to the |
|
|
|
|
| Cancel |
| Click Cancel to discard all changes made in this table. |
|
|
|
|
| Clear |
| Click Clear to set the above fields back to the factory defaults. |
|
|
|
|
42.3.4 Configuring VRRP Parameters
View the VRRP configuration summary at the bottom of the screen.
Figure 197 VRRP Configuration: Summary
The following table describes the labels in this screen.
Table 138 VRRP Configuring: VRRP Parameters
LABEL | DESCRIPTION |
Index | This field displays the index number of an entry. |
|
|
Active | This field shows whether a VRRP entry is enabled (Yes) or disabled (No). |
|
|
Name | This field displays a descriptive name of an entry. |
|
|
Network | This field displays the IP address and subnet mask of an interface. |
|
|
VRID | This field displays the ID number of a virtual router. |
|
|
Primary VIP | This field displays the IP address of the primary virtual router. |
|
|
Uplink | This field displays the IP address of the uplink gateway. |
Gateway |
|
|
|
Priority | This field displays the priority level (1 to 255) of the entry. |
|
|
Delete | Click Delete to remove the selected entry from the summary table. |
|
|
Cancel | Click Cancel to clear the Delete check boxes. |
|
|
42.4 VRRP Configuration Examples
The following sections show two VRRP configuration examples on the Switch.
| 377 |
|
|