Chapter 7 Wireless LAN

7.7 The WPS Station Screen

Use this screen to set up a WPS wireless network using either Push Button Configuration (PBC) or PIN Configuration.

Note: If you select No Security in the Wireless LAN > General screen and click Push Button in the WPS Station screen, the P-870HN-51D automatically changes to use WPA-PSK/WPA2-PSK mixed mode and generates a pre- shared key.

Click Network > Wireless LAN > WPS Station. The following screen displays.

Figure 54 Network > Wireless LAN > WPS Station

The following table describes the labels in this screen.

Table 33 Network > Wireless LAN > WPS Station

LABEL

DESCRIPTION

Push Button

Click this button to add another WPS-enabled wireless device (within

 

wireless range of the P-870HN-51D) to your wireless network. This

 

button may either be a physical button on the outside of device, or a

 

menu button similar to the Push Button on this screen.

 

Note: You must press the other wireless device’s WPS button within

 

two minutes of pressing this button.

 

 

Or input

Enter the PIN of the device that you are setting up a WPS connection

station's PIN

with and click Start to authenticate and add the wireless device to your

number

wireless network.

 

You can find the PIN either on the outside of the device, or by checking

 

the device’s settings.

 

Note: You must also activate WPS on that device within two minutes

 

to have it present its PIN to the P-870HN-51D.

 

115

P-870HN-51D User’s Guide