Chapter 8 Network Address Translation (NAT)
Table 37 NAT Port Forwarding (continued)
LABEL | DESCRIPTION |
Internal Start | This is the first internal port number that identifies a service. |
Port |
|
|
|
Internal End | This is the last internal port number that identifies a service. |
Port |
|
|
|
Server IP | This field displays the inside IP address of the server. |
Address |
|
|
|
Modify | Click the Edit icon to go to the screen where you can edit the port |
| forwarding rule. |
| Click the Remove icon to delete an existing port forwarding rule. Note |
| that subsequent rules move up by one when you take this action. |
|
|
Apply | Click Apply to save your changes back to the |
|
|
Cancel | Click Cancel to return to the previous configuration. |
|
|
8.3.1 The Port Forwarding Edit Screen
This screen lets you create or edit a port forwarding rule. Select User Define in the Service Name field or click the rule’s Edit icon in the Port Forwarding screen to open the following screen.
Figure 63 Port Forwarding Edit
The following table describes the labels in this screen.
Table 38 Port Forwarding Edit
LABEL | DESCRIPTION |
Active | Clear the check box to disable the rule. Select the check box to enable it. |
| This field is not editable if you are configuring a User Define rule. |
|
|
Service Name | Enter a name to identify this rule. This field is |
| Edit icon in the Port Forwarding screen. |
|
|
WAN Interface | Select a WAN interface for which you want to configure port forwarding |
| rules. |
|
|
132 |
| |
| ||
|
|
|