Chapter 11 Static Route
11.2 The Static Route Screen
Click Advanced > Static Route to open the Static Route screen.
Figure 82 Advanced > Static Route
The following table describes the labels in this screen.
Table 55 Advanced > Static Route
LABEL | DESCRIPTION |
# | This is the number of an individual static route. |
|
|
Active | This field indicates whether the rule is active or not. |
| Clear the check box to disable the rule. Select the check box to enable it. |
|
|
Destination | This parameter specifies the IP network address of the final destination. |
| Routing is always based on network number. |
|
|
Netmask | This parameter specifies the IP network subnet mask of the final |
| destination. |
|
|
Gateway | This is the IP address of the gateway. The gateway is a router or switch |
| on the same network segment as the device's LAN or WAN port. The |
| gateway helps forward packets to their destinations. |
|
|
Interface | This is the WAN interface through which the traffic is routed. |
|
|
Remove | Click the icon to remove a static route from the |
| displays asking you to confirm that you want to delete the route. |
|
|
Add | Click this to create a new rule. |
|
|
Apply | Click this to apply your changes to the |
|
|
160 |
| |
| ||
|
|
|