Chapter 14 Quality of Service (QoS)
The following table describes the labels in this screen.
Table 66 QoS > Policer Setup: Edit
LABEL | DESCRIPTION |
Enable | Select this to have the |
| that exceed the committed rate and/or committed burst size |
| specified in this screen. |
|
|
Meter Type | Select the method that the |
| packets to pass, drop or mark (DSCP). Choices are: Simple Token |
| Bucket, Single Rate Three Color Meter and Two Rate Three |
| Color Meter. Refer to Section 14.8.2 on page 186 for information on |
| these meter types. |
|
|
Committed | Enter the maximum committed rate for the specified class/es. |
Rate |
|
|
|
Committed | Enter the maximum committed burst size for the specified class/es. |
Burst Size |
|
|
|
Conforming | Select the action that the |
Action | conform to the meter type selected. Choices are Pass, Drop and |
| DSCP mark. |
| • Pass - the packet is allowed to flow to its destination. |
| • Drop - the packet is discarded. |
| • DSCP mark - the packet is given a DSCP mark and processed |
| accordingly. See Section 14.8.1 on page 185 for information on |
| DSCP mark. |
|
|
Non- | Select the action that the |
comforming | conform to the meter type selected. Choices are Pass, Drop and |
Action | DSCP mark. |
| |
| • Pass - the packet is allowed to flow to its destination. |
| • Drop - the packet is discarded. |
| • DSCP mark - the packet is given a DSCP mark and processed |
| accordingly. See Section 14.8.1 on page 185 for information on |
| DSCP mark. |
|
|
Regularted | Use the Add and Remove buttons to select or deselect classes to |
Classes Member | which the policy applies. |
Setting |
|
|
|
Available Class | This shows the available classes. |
|
|
Selected Class | This shows classes to which the policy applies. |
|
|
Back | Click Back to return to the previous screen without saving. |
|
|
Apply | Click Apply to save your changes back to the |
|
|
Cancel | Click Cancel to begin configuring this screen afresh. |
|
|
182 |
| |
| ||
|
|
|