Chapter 16 Remote Management

 

Table 71 TR-069 (continued)

 

LABEL

DESCRIPTION

 

Connection

Enter the connection request password.

 

Request

When the ACS makes a connection request to the P-870HN-51D, this

 

Password

 

password is used to authenticate the ACS.

 

 

 

 

 

 

Connection

This shows the connection request URL.

 

Request URL

The ACS can use this URL to make a connection request to the P-

 

 

 

 

870HN-51D.

 

 

 

 

Apply/Save

Click this button to save your changes back to the P-870HN-51D.

 

 

 

 

Cancel

Click Cancel to begin configuring this screen afresh.

 

 

 

16.3 The TR-064 Screen

TR-064 is a LAN-Side DSL CPE Configuration protocol defined by the DSL Forum. TR-064 is built on top of UPnP. It allows the users to use a TR-064 compliant CPE management application on their computers from the LAN to discover the CPE and configure user-specific parameters, such as the username and password.

Click Advanced > Remote MGMT > TR064 to open the following screen.

Figure 97 TR-064

The following table describes the fields in this screen.

Table 72 TR-064

LABEL

DESCRIPTION

Enable TR064

Select the check box to activate management via TR-064 on the LAN.

 

 

Enable

Some TR-064 commands require authentication before it can be

Authenticator

executed. Select this to have the P-870HN-51D authenticate the user

 

before running the command.

 

Deselect this to disable authentication and have the P-870HN-51D run

 

all commands.

 

 

Apply

Click this button to save your changes back to the P-870HN-51D.

 

 

 

193

P-870HN-51D User’s Guide