
Chapter 25 Product Specifications
Table 93 Firmware Specifications (continued)
Default User Name | admin | |
|
| |
Default Password | 1234 | |
|
| |
DHCP Server IP Pool | 192.168.1.33 to 192.168.1.65 | |
|
| |
Static Routes | 16 | |
|
| |
Device Management | Use the web configurator to easily configure the rich range of | |
| features on the | |
|
| |
Wireless | Allow the IEEE 802.11b, IEEE 802.11g and/or IEEE 802.11n | |
Functionality | wireless clients to connect to the | |
(wireless devices | wireless security (WEP, WPA(2), | |
to protect your wireless network. | ||
only) | ||
| ||
|
| |
Firmware Upgrade | Download new firmware (when available) from the ZyXEL web site | |
| and use the web configurator to put it on the |
| Note: Only upload firmware for your specific model! |
|
|
Configuration Backup | Make a copy of the |
& Restoration | back on the |
| earlier configuration. |
|
|
Port Forwarding | If you have a server (mail or web server for example) on your |
| network, you can use this feature to let people access it from the |
| Internet. |
|
|
DHCP (Dynamic Host | Use this feature to have the |
Configuration | IP default gateway and DNS servers to computers on your |
Protocol) | network. Your device can also act as a surrogate DHCP server |
| (DHCP Relay) where it relays IP address assignment from the |
| actual real DHCP server to the clients. |
|
|
Dynamic DNS | With Dynamic DNS (Domain Name System) support, you can use |
Support | a fixed URL, www.zyxel.com for example, with a dynamic IP |
| address. You must register for this service with a Dynamic DNS |
| service provider. |
|
|
IP Multicast | IP multicast is used to send traffic to a specific group of |
| computers. The |
| (Internet Group Management Protocol) used to join multicast |
| groups (see RFC 2236). |
|
|
NAT | NAT (includes |
| NAT Server (port forwarding) |
| VPN (IPSec, PPTP, and L2TP) Pass Through |
| NAT friendly applications: |
| NetMeeting |
| Microsoft PPTP client |
| MSN Messenger |
| |
| TFTP, FTP, H.323, RTSP, SIP ALG |
|
|
Time and Date | Get the current time and date from an external server when you |
| turn on your |
| These dates and times are then used in logs. |
|
|
Logs | Use logs for troubleshooting. You can send logs from the P- |
|
248 |
| |
| ||
|
|
|