Chapter 14 Quality of Service (QoS)
Table 64 QoS Class Configuration (continued)
LABEL | DESCRIPTION |
Ether Type | Select a predefined application to configure a class for the matched |
| traffic. |
| If you select IP, you also need to configure source or destination MAC |
| address, IP address, DHCP options, DSCP value or the protocol type. |
| If you select 8021Q, you can configure an 802.1p priority level and |
| VLAN ID in the Others section. |
|
|
Source |
|
|
|
MAC Address | Select the check box and enter the source MAC address of the packet. |
|
|
MAC Mask | Type the mask for the specified MAC address to determine which bits |
| a packet’s MAC address should match. |
| Enter “f” for each bit of the specified source MAC address that the |
| traffic’s MAC address should match. Enter “0“ for the bit(s) of the |
| matched traffic’s MAC address, which can be of any hexadecimal |
| character(s). For example, if you set the MAC address to |
| 00:13:49:00:00:00 and the mask to ff:ff:ff:00:00:00, a packet with a |
| MAC address of 00:13:49:12:34:56 matches this criteria. |
|
|
IP Address | Select the check box and enter the source IP address in dotted |
| decimal notation. A blank source IP address means any source IP |
| address. |
|
|
IP Subnet | Enter the source subnet mask. |
Mask |
|
|
|
TCP/UDP Port | If you select TCP or UDP in the IP Protocol field, select the check |
Range | box and enter the port number(s) of the source. |
|
|
Exclude | Select this option to exclude the packets that match the specified |
| criteria from this classifier. |
|
|
Destination |
|
|
|
MAC Address | Select the check box and enter the destination MAC address of the |
| packet. |
|
|
MAC Mask | Type the mask for the specified MAC address to determine which bits |
| a packet’s MAC address should match. |
| Enter “f” for each bit of the specified source MAC address that the |
| traffic’s MAC address should match. Enter “0“ for the bit(s) of the |
| matched traffic’s MAC address, which can be of any hexadecimal |
| character(s). For example, if you set the MAC address to |
| 00:13:49:00:00:00 and the mask to ff:ff:ff:00:00:00, a packet with a |
| MAC address of 00:13:49:12:34:56 matches this criteria. |
|
|
IP Address | Select the check box and enter the destination IP address in dotted |
| decimal notation. A blank source IP address means any source IP |
| address. |
|
|
IP Subnet | Enter the destination subnet mask. |
Mask |
|
|
|
TCP/UDP Port | If you select TCP or UDP in the IP Protocol field, select the check |
Range | box and enter the port number(s) of the source. |
|
|
Exclude | Select this option to exclude the packets that match the specified |
| criteria from this classifier. |
|
|
Others |
|
|
|
178 |
| |
| ||
|
|
|