Chapter 4 Status Screens
The following table describes the labels in this screen.
Table 5 Status > WAN Service Statistics
LABEL | DESCRIPTION |
Interface | This shows the name of the WAN interface used by this connection. |
| A default name ipoa0, pppoa1, atmx (where x starts from 0 and is the |
| index number of ATM |
| values) or ptm0 indicates the DSL port. The pppx name (where x starts |
| from 0 and is the index number of PPP connection on the |
| indicates a PPP connection via any one of the WAN interface. eth4 |
| indicates the Ethernet WAN interface (the physical Ethernet WAN port). |
| The number after the dot (.) represents the VLAN ID number assigned to |
| traffic sent through this connection. The number after the underscore |
| (_) represents the index number of connections through the same |
| interface. |
| (null) means the entry is not valid. |
|
|
Description | This shows the descriptive name of this connection. |
| 0 and 35 or 0 and 1 are the default VPI and VCI numbers. The last |
| number represents the index number of connections over the same PVC |
| or the VLAN ID number assigned to traffic sent through this connection. |
| (null) means the entry is not valid. |
|
|
Received |
|
|
|
Bytes | This indicates the number of bytes received on this interface. |
|
|
Pkts | This indicates the number of transmitted packets on this interface. |
|
|
Errs | This indicates the number of frames with errors received on this |
| interface. |
|
|
Drops | This indicates the number of received packets dropped on this interface. |
|
|
Transmitted |
|
|
|
Bytes | This indicates the number of bytes transmitted on this interface. |
|
|
Pkts | This indicates the number of transmitted packets on this interface. |
|
|
Errs | This indicates the number of frames with errors transmitted on this |
| interface. |
|
|
Drops | This indicates the number of outgoing packets dropped on this interface. |
|
|
Refresh | Enter the time interval for refreshing statistics in this field. |
Interval |
|
|
|
Set Interval | Click this button to apply the new poll interval you entered in the |
| Refresh Interval field. |
|
|
Stop | Click Stop to stop refreshing statistics. |
|
|
| 59 |
|
|