Ryobi RY09605 manuel dutilisation Symbols, Symbol Signal Meaning, Symbol Name Explanation

SYMBOLS

The following signal words and meanings are intended to explain the levels of risk associated with this product.

SYMBOL	SIGNAL	MEANING
	DANGER:	Indicates an imminently hazardous situation, which, if not avoided, will result
		in death or serious injury.
	WARNING:	Indicates a potentially hazardous situation, which, if not avoided, could result
		in death or serious injury.
	CAUTION:	Indicates a potentially hazardous situation, which, if not avoided, may result in
		minor or moderate injury.
	CAUTION:	(Without Safety Alert Symbol) Indicates a situation that may result in property
		damage.

Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the product better and safer.

SYMBOL	NAME	EXPLANATION
	Safety Alert Symbol	Indicates a potential personal injury hazard
	Read Operator’s Manual	To reduce the risk of injury, user must read and understand operator’s
		manual before using this product
	Wear Eye and Hearing	Always wear eye protection with side shields marked to comply with
	Protection	ANSI Z87.1 along with hearing protection.
	Long Hair	Risk of long hair being drawn into air inlet
	Loose Clothing	Risk of loose clothing being drawn into air intake
		Use unleaded gasoline intended for motor vehicle use with an octane
	Gasoline and Oil	rating of 87 [(R + M) / 2] or higher. This product is powered by a 2-cycle
		engine and requires pre-mixing gasoline and 2-cycle oil.
		This product uses nickel-­cadmium (Ni-Cd) batteries. Local, state, or
	Recycle Symbol	federal laws may prohibit disposal of batteries in ordinary trash. Consult
		your local waste authority for information ­regarding available recycling
		and/or disposal options.
	Direct Current	Type of a characteristic of current
V	Volts	Voltage
A	Amperes	Current
Hz	Hertz	Frequency (cycles per second)
min	Minutes	Time
		5 — English