Remington Power Tools M30016US, M30016AS Important Safety Information, Before Operating SAW

Page 4

IMPORTANT SAFETY INFORMATION

WARNING: When using an electric chain saw, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the fol- lowing:

READ ALL INSTRUCTIONS.

Make sure you read and understand all instructions in Important Safety Infor- mation. Improper use of this chain saw can cause severe injury or death from fire, electrical shock, body contact with moving chain, or falling wood.

BEFORE OPERATING SAW

1.Read and understand this owner’s manual before operating chain saw.

2.Watch what you are doing. Use common sense. Do not operate saw when you are tired.

3.Use chain saw for cutting wood only. Do not use chain saw for purpose not intended. Do not use for cutting plastic, masonry, etc.

4.Only well-instructed adults should operate chain saw. Never allow children to operate chain saw.

5.Use only electrical voltage noted on model plate of chain saw.

6.Use only extension cords marked for outdoor use. See Extension Cord Requirements.

7.Do not operate chain saw

•while under the influence of alcohol, medi- cation, or drugs

•in rain or in damp or wet areas

•where highly flammable liquids or gases are present

•if saw is damaged, adjusted wrong, or not fully and securely assembled

•if trigger does not turn saw on and off. Chain must stop moving when you release trigger. Have faulty switch replaced by authorized service center (see Technical Service).

•while in a hurry

•while in tree or on a ladder unless trained to do so

8.Wear snug-fitting clothes when operating chain saw. Do not wear loose clothing or jewelry. They can get caught in moving saw chain.

9.Wear the following safety gear when operating chain saw.

•heavy-duty gloves (wear rubber gloves when working outdoors)

•steel-toed safety footwear with non-skid soles

•eye protection such as safety glasses, goggles, or face screen

•safety hard hat

•ear mufflers or ear plugs

•hair covering to contain long hair

•face or dust mask (if working in dusty areas)

10.Before cutting, always provide the follow- ing:

•clear work area

•secure footing

•planned retreat path from falling tree

11.Inspect tree before cutting down. Make sure there are no dead limbs or branches that may fall on you.

12.To reduce the risk of electric shock, this saw has a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet of your extension cord, reverse the plug. If it still does not fit, a polar- ized extension cord will be necessary. Do not change the plug in any way.

WHILE OPERATING SAW

1.Stay alert. Use common sense while operating chain saw.

2.Keep work area clean. Cluttered areas invite injuries.

3.Be aware of extension cord while operating chain saw. Be careful not to trip over cord. Keep cord away from chain and operator at all times.

4.Keep children, animals, and bystanders away from chain saw and extension cord. Only chain saw user should be in work area.

5.Do not cut down a tree unless you are trained or have expert help.

6.If two or more persons perform bucking and felling operations at the same time, provide plenty of distance between operations. Provide distance of at least twice the height of tree being felled.

7.Secure wood you are cutting by using clamps or chocks.

8.Grip chain saw firmly with both hands. Never operate chain saw with one hand. Never use hand guard as handle.

9.Keep finger off trigger until ready to make cut.

www.remingtonpowertools.com

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Electric Chain SAW Stop Para Arrét Call 1-800-626-2237 for Technical AssistanceContents Important Safety Information Before Operating SAWWhile Operating SAW Read ALL InstructionsKickback Safety Devices On This Saw KickbackLead from lead-based paints Arsenic and chromium from chemi- cally-treated lumberMaintenance and Storage Chain SAW Saw Maintenance and Kickback SafetyUnpacking Product Identification Models M15012US, M15014AS, M30016US, M30016ASRear Handle Handle located at rear of saw body Chain SAW Names and TermsUnibody Main body of chain saw Power Cord Hitch Slot Extension Cord Quick Start GuideImportant Do not clamp chain saw in vise during assembly AssemblyRotate guide bar retainer 90 degrees as shown in Figure Retighten the bar nut finger tight Pulling Guide BarSAW Chain Tension Adjustment Bar, allow chain to cool thenLoosen nut Turn chain tensioning screw Clockwise to tension saw chainOperating Chain SAW Filling OIL TankOiling Chain Manual Oil SystemCutting with the Chain SAW Extension CordsCord Length AWG Cord Size Before Felling a Tree Felling Procedure Felling NotchFelling Cut Bucking a LOG Limbing a TreeEntire Length Of Log On Ground Log Supported On Both Ends Log Supported On One EndTrimming a Tree Pruning Cleaning and Maintenance Normal Guide Bar MaintenanceSharpening SAW Chain Care of Guide BARItems Needed to Sharpen Chain Sharpening CuttersFiling Cutter Depth Gauges Replacing Saw ChainReplacement Chains Replacement Parts and AccessoriesRepair Service StorageTroubleshooting Technical ServiceWarranty Information Remington Brand Electric Chain SAW Limited WarrantiesSierra Eléctrica Información Importante DE Seguridad Limpieza Y MantenimientoInformación Importante DE Seguridad Antes DE Utilizar LA SierraAL Utilizar LA Sierra Permanezca alerta. Utilice el sentido comúnContragolpes Dispositivos de seguridad de esta sierra contra contragolpes Mantenimiento de la cadena y seguridad contra contragolpesMantenimiento Y Almacenamiento DE SU Sierra Eléctrica DesembalajeCuide de su sierra eléctrica Nunca la exponga a la lluvia Identificación DEL Producto Modelos M15012US, M15014AS, M30016US, M30016ASTerminología Guía Rápida DE Arranque Ensamblaje Figura 2 Desbloqueo del retenedor de la barra guíaPodrá ni empujar ni halar a la barra guía BarraAjuste DE Tensión DE LA Cadena Serrada ImportanteUSO DE LA Sierra Eléctrica LubricaciónLubricación DE LA Cadena Remoción DE Restos DE LA Tapa DE LA Rueda DentadaLongitud Tamaño AWG Cables DE ProlongaciónRealización DE Cortes Tala DE UN Árbol Derribamiento de un árbol AdvertenciaAntes de derribar un árbol Procedimiento de tala Corte de la muescaTala final Desmembramiento DE UN ÁrbolTronco apoyado en un extremo Trozado DE UN TroncoTronco apoyado sobre ambos extremos Poda DE UN Árbol Figura 18 Trozado del tronco apoyado sobre ambos extremosLimpieza Y Mantenimiento Limpieza DEL CabezalCuidado DE LA Barra DE Guía Mantenimiento normal de la barra de guíaAfilado DE LA Cadena Elementos necesarios para afilar la cadenaAfilado de los elementos de corte Utilice la guía de escofina para limar a un ángulo deAlmacenamiento Limado de los calibradores de medida de profundidadVea la Figura Cadenas de repuestoServicio DE Reparación Servicio TécnicoAccesorios Y Piezas DE Repuesto Servicio con garantíaDiagnóstico Y Resolución DE Problemas Falla Observada Causa Posible SoluciónInformación DE Garantía Modelo Fecha de compraTronçonneuse Électrique Prime Consignes DE Sécurité Importantes Nettoyage ET EntretienConsignes DE Sécurité Importantes Avant D’UTILISER LA TronçonneusePendant Lutilisation DE LA Tronçonneuse Lisez Toutes LES Instruc TionsPermanence le cordon à lécart de la chaîne et de lopérateur Recul Entretien de la tronçonneuse et protection contre le reculEntretien ET Remisage DE LA Tronçonneuse DéballageSortir du carton toutes les pièces Identification DU Produit Modèles M15012US, M15014AS, M30016US, M30016ASVocabulaire DE LA Tronçonneuse Ébranchage Coupe des branches d’un arbre abattuGuide DE Démarrage Rapide Connaître le calibre appropriéMontage Dans la FigureÉloignez le guide-chaîne Réglage DE LA Tension DE LA Chaîne Utilisation DE LA Tronçonneuse Remplissage DU Réservoir D’HUILELubrification DE LA Chaîne Nettoyage DES Débris DU Couvercle DU PignonSciage Avec LA Tronçonneuse Rallonges ÉlectriquesLongueur du Taille AWG du Abattage D’UN Arbre Avant d’abattre un arbreProcédure d’abattage Sifflet d’abattage AvertissementTrait d’abattage ÉbranchageEnlever le morceau de tronc créé par les deux entailles Scier en direction du siffletTronçonnage D’UNE Bille Toute la bille repose au solLa bille est soutenue à une extrémité Procéder de la façon suivante pour tronçonner une billeRecul La bille est soutenue aux deux extrémitésTaille D’UN Arbre Élagage Avertissement Éviter LANettoyage ET Entretien Nettoyage DU Carter DE TronçonneuseEntretien DE LA GUIDE-CHAÎNE Entretien normal de la guide-chaîneAffûtage DE LA Chaîne Outils nécessaires pour affûter la chaîneAffûtage des taillants Gants de protection pour manipuler la chaîneRemplacement DE LA Chaîne Chaînes DE RechangeLimage des limiteurs de profondeur Des taillantsService Technique Pièces DE Rechange ET AccessoiresService DE Réparation RemisageDépannage Défaillance Observée Cause Possible RemèdeInformation SUR LA Garantie Produits NeufsPage Page Parts LIST/LISTA DE REPUESTOS/LISTE DES Pièces DESCRIPTION/DESCRIPCIÓN/DESCRIPTIONParts CENTRAL/CENTRAL DE PIEZAS/DÉPÔT DE Pièces Hance Distributors, IncPage 113005-01 Rev.G 03/08
Top Page Image Contents