Homelite UT80432 manuel dutilisation Features, Assembly

Page 11

 

 

FEATURES

 

 

 

 

 

 

 

 

 

 

 

 

PRODUCT SPECIFICATIONS

 

 

Fuel Tank Capacity

0.9.6 gal

Oil Capacity

20.3 oz.

Maximum Pounds Per Square Inch Pressure*

3,100 psi

Maximum Gallons Per Minute*

2.5 gpm

Maximum Inlet Water Temperature

104˚F

*Max. rating determined by PWMA Standard 101

 

 

KNOW YOUR PRESSURE WASHER

See Figure 1.

The safe use of this product requires an understanding of the information on the tool and in this operator’s manual as well as a knowledge of the project you are attempting. Before use of this product, familiarize yourself with all operating features and safety rules.

ON/OFF SWITCH

The on/off switch is used in combination with the starter grip and rope to start the engine. It is also used to turn the engine off.

STARTER GRIP AND ROPE

The starter grip and rope is pulled to start the machine.

5-IN-1 CHANGE OVER NOZZLE

The 5-in-1 Change Over Nozzle makes it easy to change spray patterns.

FUEL TANK

This fuel tank has a maximum capacity of 0.9.6 gal. Use unleaded automotive gasoline in the engine.

HONDA GCV190 ENGINE

This Honda engine enables the pressure washer to achieve 3,100 psi (pounds per square inch) at a rate of 2.5 gpm (gallons per minute). Please read the engine manual included with this product.

HOSE STORAGE

Once the high pressure hose is rolled, hang it on the back of the machine using the stretch strap to secure in place.

SPARK ARRESTOR

This engine is not factory equipped with a spark arrestor. In some areas it is illegal to operate an engine without a spark arrestor. A spark arrestor is available by calling customer service for assistance.

THERMAL RELEASE VALVE

This pump feature will prevent water temperatures from reaching harmful levels by releasing a small amount of water. Once the water has drained, the thermal relief valve will reset itself.

TRIGGER HANDLE

The trigger handle has a gripping surface that provides added control of the spray wand and helps reduce fatigue.

TRIGGER WITH LOCK OUT

Pulling the trigger releases a stream of water for high pressure cleaning. The lock out provides protection against unauthorized use.

ASSEMBLY

UNPACKING

This product requires assembly.

nCarefully remove the product and any accessories from the box. Make sure that all items listed in the packing list are included.

WARNING:

Do not use this product if any parts on the Packing List are already assembled to your product when you unpack it. Parts on this list are not assembled to the product by the manufacturer and require customer installation. Use of a product that may have been improperly assembled could result in serious personal injury.

NOTE: This tool is heavy. To avoid back injury, lift with your legs, not your back, and get help when needed.

nInspect the tool carefully to make sure no breakage or damage occurred during shipping.

nDo not discard the packing material until you have care- fully inspected and satisfactorily operated the tool.

nIf any parts are damaged or missing, please call 1-800-242-4672 for assistance.

Page 7 — English

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Save this Manual for Future Reference PSI Pressure WasherSoap Soap Iii Paper clip pièces de papier, clips de papel Introduction Table of Contents3 English Important Safety InstructionsRead ALL Instructions 4 English Specific Safety Rules5 English Symbols6 English Assembly FeaturesTools Needed Connecting High Pressure Hose to Trigger HandleConnecting the High Pressure Hose to the Pump Packing ListSee Figures 9 Connecting the Garden Hose to the Pressure WasherOperation Attaching Injection HoseOxygenated Fuels ApplicationsAdding Lubricant to the Engine Starting and Stopping the Pressure WasherUsing the High Pressure Hose Using the Spray Wand TriggerINSTALLING/REMOVING Nozzles Using the 5-IN-1 Change Over NozzleSee Figures 18 Washing with DetergentRinsing with the Pressure Washer Moving the Pressure WasherMaintenance 14 English Pump LubricationStoring the Pressure Washer Preparing for USE After Storage15 English Periodic Maintenance ScheduleMaintenance Items Each use Weekly 25 hrs 50 hrs 200 hrs 16 English TroubleshootingProblem Cause Solution 17 English WarrantyLimited NON Engine Warranty Statement  Faire preuve de prudence pour éviter de glisser ou tomber Instructions Importantes Concernant LA SécuritéAVERTISSEMENT  Lire Toutes LES Instructions4 Français Règles DE Sécurité Particulières5 Français SymbolesAvertissement 6 Français Assemblage CaractéristiquesAssemblage DE Poignée DE Gâchette Liste DE ContrôleOutils Nécessaires Rélever ET Abaisser LA PoignéeAJOUT/VÉRIFICATION DE Lubrifiant Installation DU Tuyau D’INJECTIONUtilisation Connexion DU Tuyau D’ARROSAGE AU Nettoyeur Haute PressionVoir les figures 13 Carburants OxygénésAppoint D’ESSENCE Mise EN Marche / Arrêt DU Nettoyeur Haute PressionUtilisation DU Tuyau Haute Pression INSTALLATION/RETRAIT DES BusesFonctionnement Poignée DE Gâchette Utilisation DE LA Buse À Permutation 5 ENVoir les figures 18 et Déplacement DU Nettoyeur Haute PressionNettoyage Avec DU Détergent Rinçage Avec LE Nettoyeur Haute PressionNettoyage DU Filtre À AIR EntretienEntretien DE Buse Entretien GénéralRemisage DU Nettoyeur Haute Pression Remise EN Service Après RemisageChangement Huile DE Moteur Lubrification DU Pompe15 Français Tableau DE Calendrier D’ENTRETIEN Périodique16 Français Problème Cause SolutionDépannage 17 Français GarantieÉnoncé DE LA Garantie Limitée Hors Moteur Página 3 Español Instrucciones DE Seguridad ImportantesGuarde Estas Instrucciones Área DE Trabajo Página 4 Español Reglas DE Seguridad EspecíficasPrecaución SímbolosPeligro AdvertenciaPágina 6 Español Armado CaracterísticasArmado DE Mango DEL Gatillo Lista DE EmpaquetadoHerramientas Necesarias Levantar Y Bajar EL MangoPágina 9 Español FuncionamientoCómo Conectar LA Manguera DE Inyeccion Abastecimiento DEL Tanque DE Gasolina UsosAbastecimiento DE Lubricante DEL Motor Combustibles OxigenadosUSO DE LA Manguera DE Alta Presión USO DEL Mango DEL GatilloInstalar Y Desmontaje LAS Boquillas USO DE LA Boquilla Intercambiable 5 ENPágina 12 Español Lavado CON DetergenteTraslado DE LA Lavadora DE Presión Limpieza DEL Filtro DE Aire MantenimientoMantenimiento General Mantenimiento DE LAS BoquillasPágina 14 Español Cambio DE Aceite DE MotorLubricación DE LA Bomba Guardado DE LA Lavadora DE PresiónPágina 15 Español Programa DE MantenimientoPágina 16 Español Solución DE ProblemasProblema Causa Solución Página 17 Español GarantíaManuel D’UTILISATION Manual DEL Operador OPERATOR’S Manual

UT80432 specifications

The Homelite UT80432 is a powerful and versatile electric chainsaw designed for homeowners and DIY enthusiasts who require a reliable tool for cutting and trimming tasks around the yard. As a part of the Homelite lineup, this chainsaw combines innovative technologies with user-friendly features, making it an ideal choice for both novice and experienced users.

One of the most notable features of the UT80432 is its robust 8-amp motor. This powerful engine provides ample cutting strength, allowing users to tackle various tasks such as pruning branches, cutting firewood, or handling small to medium-sized trees. The chainsaw's design focuses on efficiency, enabling users to make swift and precise cuts with minimal effort.

The UT80432 is equipped with a 12-inch cutting bar and chain, which strikes an excellent balance between maneuverability and cutting capacity. This length is suitable for a variety of applications, ensuring that users can perform their tasks effectively without being overwhelmed by the size and weight of the tool. Its lightweight construction further enhances usability, making it easy to carry and operate for extended periods.

Safety is a paramount concern in any power tool, and the Homelite UT80432 doesn't fall short in this aspect. It features a chain brake that immediately halts the chain's operation in the event of kickback, providing an additional layer of protection for users. Additionally, the chainsaw includes a safety switch to prevent accidental starts, ensuring peace of mind during operation.

Another key characteristic of the UT80432 is its tool-free chain tensioning system. This feature simplifies the process of adjusting the chain tension, making it easier for users to maintain optimal performance without the need for specialized tools. The clear viewing window for the oil reservoir allows users to easily monitor oil levels, which helps prolong the life of the chain and bar.

The chainsaw is further designed with ergonomic considerations. Its cushioned handle ensures a comfortable grip, reducing user fatigue during prolonged use. The overall weight distribution of the unit contributes to better control and stability, which fosters greater precision during cutting tasks.

In summary, the Homelite UT80432 is an efficient and user-friendly electric chainsaw that stands out due to its powerful motor, lightweight design, safety features, and easy maintenance capabilities. It is a practical addition to any homeowner's toolkit, particularly for those looking to manage their outdoor spaces effectively and safely.
Top Page Image Contents