Homelite UT80516 manuel dutilisation Features, Tools Needed, Product Specifications

	FEATURES
PRODUCT SPECIFICATIONS
Fuel Tank Capacity	0.25 gal.
Maximum Pounds Per Square Inch Pressure*	2,200 psi
Maximum Gallons Per Minute*	2.0 gpm
Maximum Inlet Water Temperature	104˚F
*Max. rating determined by PWMA Standard 101

KNOW YOUR pressure washer

See Figure 1.

The safe use of this product requires an understanding of the information on the tool and in this operator’s manual as well as a knowledge of the project you are attempting. Before use of this product, familiarize yourself with all operating features and safety rules.

Fuel tank

This fuel tank has a maximum capacity of 0.25 gal. Use unleaded automotive gasoline in the engine.

THERMAL RELief VALVE

This pump feature will prevent water temperatures from reaching harmful levels by releasing a small amount of water. Once the water has drained, the thermal relief valve will reset itself.

trigger handle

The trigger handle has a gripping surface that provides added control of the spray wand and helps reduce fatigue. Both the trigger handle and spray wand have storage areas located on the sides of the machine.

HOSE storage

Once the high pressure hose is rolled, hang it on the machine using the hook-and-loop strap to secure in place.

On/off switch

To turn the engine off, press the ON/OFF switch.

recoil starter

The recoil starter is pulled to start the machine.

trigger with lock out

Pulling the trigger releases a stream of water for high pressure cleaning. The lock out provides protection against unauthorized use.

TOOLS NEEDED

The following tools (not included or drawn to scale) are needed for assembly:

See Figure 1a.

n7/16 in. wrench

nPhillips head screwdriver

Page 7 — English