Baldor TS35, TS25, TS45, TS60 Sensor fail FLS see Table, Shut down SD see Table, Possible Warnings

AlarmsFollowing alarms are available:

Sensor fail (FLS) see Table 4-5

Sensor fail is detected when measured value is 6% out of selected sensor characteristic. Sensor fail is indicated by ##### symbol instead measured value.

Warning (WRN) see Table 4-5

When warning comes up, only alarm outputs and common warning output are closed.

Shut down (SD) see Table 4-5

When the shut−down alarm comes up, InteliLite opens outputs GCB CLOSE/OPEN, FUEL SOLENOID, STARTER and PRESTART to stop the engine immediately. Alarm outputs and common shutdown output are closed. Active or not reset protection disables start.

	Table 4-5 Possible Warnings
Events specification		Protection type
Wrn Oil press		WRN
Sd Oil press		SD
Wrn Water temp		WRN
Sd Water temp		SD
Wrn Wtemp Low		WRN
Wrn Fuel Level		WRN
Sd Fuel Level		SD
Battery voltage <, >		WRN
Battery flat		SD
Start fail		SD
Vgen <, >		SD
Vgen unbl		SD
Fgen <, >		SD
Igen unbl		SD
Overload		SD
RPM over		SD
RPM under		SD
PickupFault		SD
Stop fail		SD
WrnServiceTime		WRN
Emergency Stop		SD
ECU Common Warning		WRN
ECU Shutdown		SD

4-12 Operation MN2417