Intel 41210 manual PCI-X Topology Layout Guidelines, PCI-X Slot Guidelines

PCI-X Layout Guidelines

8.5PCI-X Topology Layout Guidelines

The PCI-X Addendum to the PCI Local Bus Specification, Revision 1.0b compliant, recommends the following guidelines for the number of loads for your PCI-X designs. Any deviation from these maximum values requires close attention to layout with regard to loading and trace lengths.

Table 9.	PCI-X Slot Guidelines
	Frequency	Maximum Loads	Maximum Number of Slots
	66 MHz	8	4
	100 MHz	4	2
	133 MHz	2	1

8.6Intel® 41210 Serial to Parallel PCI Bridge Design Guide Layout Analysis

The following sections describes layout recommendations based on the presilicon signal integrity analysis. This analysis was conducted using the following parameters:

•Card stack up: 60 Ω +/- 15% single-ended impedance

•Driver Model 41210 Bridge IBIS

•Receiver Model: generic models for PCI-X and PCI

•Driver Package Model: Preliminary 41210 Bridge Model

•Cross talk and ISI impact on timing were not modeled

38 Intel® 41210 Serial to Parallel PCI Bridge Design Guide