Sanyo SRT-2400DC instruction manual Alarm Search, Alarm Scan

Page 27

NU4QG/NA3 (SRT-2400DC GB) Mon. Sept., 17/2001

ALARM RECORDING

Alarm Search

To go to the beginning of a desired alarm recording.

1Press the PAUSE/SEARCH button during stop mode.

°“AL SEARCH 01” will be displayed on screen.

2Press the l (or j) button to set the desired alarm number (1 to 99), then press the FF (or REW) button.

°The desired alarm is searched and a still image of the beginning of the alarm recording will appear on-screen.

NOTE:

•The alarm number is relative to the actual tape position. (Please refer to the illustration below.)

						Playback
		Alarm number 2				1			1	2
	Alarm		input point
		trigger
		trigger
			Rewind direction						Fast-forward direction

						Actual position
						Actual position

3Press the PLAY button.

°Playback will start.

NOTE:

•If during a search the end of the tape is reached, the tape will rewind and stop. If the beginning of the tape is reached, it will stop.

Alarm Scan

To look for an alarm recording by viewing the first 5 seconds of each alarm recording.

1Press the PAUSE/SEARCH button twice during stop mode.

°“AL SCAN” will be displayed on screen.

2Press the FF (or REW) button.

°The unit will advance (or rewind) the tape at high speed and playback the first 5 seconds of every alarm recording.

°To cancel the alarm scan mode, press the STOP button.

3While the desired recording is being played back, press the PLAY button.

°Playback will start, alarm scan mode is cancelled.

NOTE:

•If during a scan the end of the tape is reached, the tape will rewind and stop. If the beginning of the tape is reached, it will stop.

26

English

Image 27

Contents SRT-2400DC For the customers in Canada PrecautionsAvoiding Electrical Shock and Fire PrecautionsMoisture Condensation Problems LocationFeatures ContentsFront Panel Locations of Controls and IndicatorsLocations of Controls and Indicators Operation IndicatorsDigital Display Wvut Q O N Back PanelBack Panel With the optional RS-485 board About the memory reset DC power source output DC power maximum cord LengthsConnections ON-SCREEN Menus ON-SCREEN Menus Setting procedure is now completed Setting the Language and ClockLanguage Setting Clock settingAutomatic Daylight Saving Time Adjustment Setting the Language and ClockDate and time are displayed Changing the ON-SCREEN DisplaySelecting the On-screen Display Changing the Date/Time Display PositionVideo Cassette Tapes Correct tape thread check function Setting the Action to Take When a Cassette is LoadedSetting the Type of Tape Used Video Cassette TapesIf tape management data is present on the tape Tape Management FunctionOperation If no tape management data is present on the tapeTape Management Function Setting the Tape Management FunctionConflict display sample Tape Management Conflict DisplayNormal Recording Recording Speed ModeWhen Tape in the SET UP 5 menu is set to T-160 When Tape in the SET UP 5 menu is set to T-120Recording Check Normal RecordingConcerning the Number of Times Tapes can be Rerecorded on Record PauseAction to Take when the Video Signal Deteriorates Changes to the Recording Speed Mode During RecordingTape Counter Notes Setting the Mode at the End of the Tape Repeat indicator will light Autorepeat Recording Autorepeat Recording Alarm Recording Alarm Recording SettingAlarm Mode setting is flashing Alarm Recording Alarm Recording Counter DisplayChecking the Alarm Recordings Time Alarm Scan Alarm SearchProgram Timer Recording Day of the week of the 8th line is flashing Program Timer RecordingTo Cancel all Program Timer Recordings Setting the HolidaysChanging a Program Timer Recording To Cancel a Program Timer RecordingThese portions will not be recorded Series recording connections Series Recording SetupRecording will start in series recording mode Series RecordingContinous Loop Recording Setup Series RecordingLoop recording connection example with 2 VCRs Vertical Lock Control Normal PlaybackNormal Playback Tracking ControlField Advance Special PlaybackPicture Search Forward and Reverse Still ImageSearch 01 0000 will be displayed on screen Setting the Security LockDAY/TIME Search Day/Time SearchSetting the Buzzer Clock AdjustmentSetting procedure on the first VCR is now completed Eject in terminal Setting the Cassette Eject ModeCassette Eject Setup Eject terminal connectionAddress setting is flashing Settings for RS485 Terminals USE@@@@POWER@FAILURE Tape END OUT Terminal Tape END OUT Terminal Output SettingSW OUT Terminal Output Setting Output TerminalsOutput Terminals Series OUT/NON REC OUT terminal settingAlarm IN/CLOCK in and Alarm OUT/CLOCK OUT terminal setting Input Output setting is flashingRemote control setting Remote JackCOM Terminal Output Terminals Maintenance Maintenance Maintenance TableMaintaining and Checking The Mechanism Troubleshooting Guide After a Power FailureSystem Down Specifications Weekdays 830 AM 500 PM Pacific Time Sanyo Industrial VCR WarrantyNU4QG/NA3 SRT-2400DC GB Mon. Sept., 17/2001