Sanyo SRT-2400DC Normal Playback, Tracking Control, Vertical Lock Control, Audio Playback

Page 34

NU4QG/NA3 (SRT-2400DC GB) Mon. Sept., 17/2001

NORMAL PLAYBACK

Normal Playback

1Turn on the power to the VCR and TV monitor.

2Load the video cassette tape.

3Press the REC/PLAY SPEED CHANGE button to select the playback speed mode.

°The selected playback speed mode is displayed on the digital display.

NOTE:

•A slow motion effect or accelerated playback effect can be achieved by using a slower or faster playback speed than the speed used for recording.

4Press the PLAY button.

°Playback starts.

°If necessary, adjust the tracking to eliminate the noise from the picture.

°If the image is unstable (rolling vertically), adjust the vertical lock control to correct.

5To stop playback, press the STOP button.

°To advance or rewind the tape, press the FF or REW button.

NOTES:

•If a tape recorded in SP mode on a standard VCR is loaded, playback will be done in 2-hour mode.

•A tape recorded on a real time video recorder produced by another manufacturer may not play back with the same degree of clarity on this unit.

•When used with a multiplexer in 24- or 40-hour mode playback (or when “TAPE” in (SET UP 5) menu is set to “T-120”, in 18- or 30-hour mode playback), the image may roll vertically. In such a case, in menu (SET UP 3) set “VERTICAL SYNC.” to “N”.

Tracking Control

If there is noise in the image during playback,

1While looking at the playback picture, press and hold the TRACKING/V. STILL+ button to minimize the noise.

2If it cannot be minimized, press the TRACKING/V. STILL– button.

Vertical Lock Control

During still image mode,

1Press and hold the TRACKING/V. STILL+ button to reduce the vertical rolling of the image.

2If it cannot be corrected, press the TRACKING/V. STILL– button.

Audio Playback

•The playback speed has to be the same as the recording speed, for normal playback of the audio.

English

33

Image 34

Contents SRT-2400DC Precautions For the customers in CanadaLocation PrecautionsMoisture Condensation Problems Avoiding Electrical Shock and FireContents FeaturesLocations of Controls and Indicators Front PanelOperation Indicators Locations of Controls and IndicatorsDigital Display Back Panel Wvut Q O NBack Panel With the optional RS-485 board DC power source output DC power maximum cord Lengths About the memory resetConnections ON-SCREEN Menus ON-SCREEN Menus Clock setting Setting the Language and ClockLanguage Setting Setting procedure is now completedSetting the Language and Clock Automatic Daylight Saving Time AdjustmentChanging the Date/Time Display Position Changing the ON-SCREEN DisplaySelecting the On-screen Display Date and time are displayedVideo Cassette Tapes Video Cassette Tapes Setting the Action to Take When a Cassette is LoadedSetting the Type of Tape Used Correct tape thread check functionIf no tape management data is present on the tape Tape Management FunctionOperation If tape management data is present on the tapeSetting the Tape Management Function Tape Management FunctionTape Management Conflict Display Conflict display sampleWhen Tape in the SET UP 5 menu is set to T-120 Recording Speed ModeWhen Tape in the SET UP 5 menu is set to T-160 Normal RecordingRecord Pause Normal RecordingConcerning the Number of Times Tapes can be Rerecorded on Recording CheckChanges to the Recording Speed Mode During Recording Action to Take when the Video Signal DeterioratesSetting the Mode at the End of the Tape Tape Counter NotesAutorepeat Recording Repeat indicator will lightAutorepeat Recording Alarm Recording Setting Alarm RecordingAlarm Mode setting is flashing Alarm Recording Counter Display Alarm RecordingChecking the Alarm Recordings Time Alarm Search Alarm ScanProgram Timer Recording Program Timer Recording Day of the week of the 8th line is flashingTo Cancel a Program Timer Recording Setting the HolidaysChanging a Program Timer Recording To Cancel all Program Timer RecordingsThese portions will not be recorded Series Recording Series Recording SetupRecording will start in series recording mode Series recording connectionsSeries Recording Continous Loop Recording SetupLoop recording connection example with 2 VCRs Tracking Control Normal PlaybackNormal Playback Vertical Lock ControlStill Image Special PlaybackPicture Search Forward and Reverse Field AdvanceDay/Time Search Setting the Security LockDAY/TIME Search Search 01 0000 will be displayed on screenClock Adjustment Setting the BuzzerSetting procedure on the first VCR is now completed Eject terminal connection Setting the Cassette Eject ModeCassette Eject Setup Eject in terminalSettings for RS485 Terminals USE Address setting is flashing@@@@POWER@FAILURE Output Terminals Tape END OUT Terminal Output SettingSW OUT Terminal Output Setting Tape END OUT TerminalInput Output setting is flashing Series OUT/NON REC OUT terminal settingAlarm IN/CLOCK in and Alarm OUT/CLOCK OUT terminal setting Output TerminalsRemote Jack Remote control settingCOM Terminal Output Terminals Maintenance Maintenance Table MaintenanceMaintaining and Checking The Mechanism After a Power Failure Troubleshooting GuideSystem Down Specifications Sanyo Industrial VCR Warranty Weekdays 830 AM 500 PM Pacific TimeNU4QG/NA3 SRT-2400DC GB Mon. Sept., 17/2001