Sanyo SRT-2400DC instruction manual Output Terminals

Page 44

NU4QG/NA3 (SRT-2400DC GB) Mon. Sept., 17/2001

OUTPUT TERMINALS

WARNING OUT Terminal

•

•

If the tape stops or other problem, the output becomes 0V (Low).

To reset the output, press the STOP or ALL RESET button or unplug the power cord then plug it back in.

Tape movement stop

Output reset

5V (H)

(Output impedance: 5.7 kΩ) 0V (L)

WARNING OUT Terminal Output Setting

1Press the MENU button until the (SET UP 5) menu is displayed.

@@@@@@@<SET@UP@5>

*INPUT@OUTPUT@ALARM

*OUTPUT@@@@@@@SERIES

*WARN.@OUT@@@@TRANSPORT

*REMOTE@@@@@@@EJECT *TAPE@@@@@@@@@T-160

2Press the ] button, until the “WARN. OUT” setting is flashing.

3Press the l (or j) button, to select the desired output mode.

TRANSPORT. The output becomes 0V (Low) when the tape stops or other probrem with the internal mechanism.

V. LOSS . . . . . The output becomes 0V (Low) when there is no video signal (Please refer to page 21, “Action to Take when the Video Signal Deteriorates.”).

T OR V . . . . . . The output become 0V (Low) when the tape stops or other problem with the internal mechanism, or when there is no video signal (Please refer to page 21, “Action to Take when the Video Signal Deteriorates.”).

NOTE:

•If in the (SET UP 4) menu “VIDEO LOSS” is set to “N”, the “WARN. OUT” setting will be preset to “TRANSPORT” and cannot be changed.

4Press the PAUSE/SEARCH button to save the setting.

English

43

Image 44

Contents SRT-2400DC Precautions For the customers in CanadaPrecautions Moisture Condensation ProblemsLocation Avoiding Electrical Shock and FireContents FeaturesLocations of Controls and Indicators Front PanelDigital Display Locations of Controls and IndicatorsOperation Indicators Back Panel Wvut Q O NBack Panel With the optional RS-485 board Connections About the memory resetDC power source output DC power maximum cord Lengths ON-SCREEN Menus ON-SCREEN Menus Setting the Language and Clock Language SettingClock setting Setting procedure is now completedSetting the Language and Clock Automatic Daylight Saving Time AdjustmentChanging the ON-SCREEN Display Selecting the On-screen DisplayChanging the Date/Time Display Position Date and time are displayedVideo Cassette Tapes Setting the Action to Take When a Cassette is Loaded Setting the Type of Tape UsedVideo Cassette Tapes Correct tape thread check functionTape Management Function OperationIf no tape management data is present on the tape If tape management data is present on the tapeSetting the Tape Management Function Tape Management FunctionTape Management Conflict Display Conflict display sampleRecording Speed Mode When Tape in the SET UP 5 menu is set to T-160When Tape in the SET UP 5 menu is set to T-120 Normal RecordingNormal Recording Concerning the Number of Times Tapes can be Rerecorded onRecord Pause Recording CheckChanges to the Recording Speed Mode During Recording Action to Take when the Video Signal DeterioratesSetting the Mode at the End of the Tape Tape Counter NotesAutorepeat Recording Repeat indicator will lightAutorepeat Recording Alarm Mode setting is flashing Alarm RecordingAlarm Recording Setting Checking the Alarm Recordings Time Alarm RecordingAlarm Recording Counter Display Alarm Search Alarm ScanProgram Timer Recording Program Timer Recording Day of the week of the 8th line is flashingSetting the Holidays Changing a Program Timer RecordingTo Cancel a Program Timer Recording To Cancel all Program Timer RecordingsThese portions will not be recorded Series Recording Setup Recording will start in series recording modeSeries Recording Series recording connectionsLoop recording connection example with 2 VCRs Continous Loop Recording SetupSeries Recording Normal Playback Normal PlaybackTracking Control Vertical Lock ControlSpecial Playback Picture Search Forward and ReverseStill Image Field AdvanceSetting the Security Lock DAY/TIME SearchDay/Time Search Search 01 0000 will be displayed on screenSetting procedure on the first VCR is now completed Setting the BuzzerClock Adjustment Setting the Cassette Eject Mode Cassette Eject SetupEject terminal connection Eject in terminalSettings for RS485 Terminals USE Address setting is flashing@@@@POWER@FAILURE Tape END OUT Terminal Output Setting SW OUT Terminal Output SettingOutput Terminals Tape END OUT TerminalSeries OUT/NON REC OUT terminal setting Alarm IN/CLOCK in and Alarm OUT/CLOCK OUT terminal settingInput Output setting is flashing Output TerminalsCOM Terminal Remote control settingRemote Jack Output Terminals Maintenance Maintaining and Checking The Mechanism MaintenanceMaintenance Table System Down Troubleshooting GuideAfter a Power Failure Specifications Sanyo Industrial VCR Warranty Weekdays 830 AM 500 PM Pacific TimeNU4QG/NA3 SRT-2400DC GB Mon. Sept., 17/2001