Sanyo SRT-2400DC instruction manual @@@@Power@Failure

Page 40

NU4QG/NA3 (SRT-2400DC GB) Mon. Sept., 17/2001

CHECKING POWER FAILURE, FAILURE DUE TO CONDENSATION AND USAGE DURATION

1Press the MENU button until the (POWER FAILURE), (DEW) and (USED TIME) menu is displayed.

(POWER FAILURE) . . . The number of power failures, and the date and time of the most recent power failure and recovery are displayed.

(DEW) . . . . . . . . . . . . . The number of failures due to condensation, and the date and time of the most recent failure and recovery are displayed.

(USED TIME) . . . . . . . . The video heads usage duration and the power on duration are displayed.

Example

@@@@<POWER@FAILURE>

002@FAILURE@@12-25@07:15

@@@@RECOVERY@12-25@07:30

@@@@@@@@@<DEW>

001@FAILURE@@12-25@11:00

@@@@RECOVERY@12-25@12:00

@@@@@@<USED@TIME>

@@@@VIDEO@@@@@@@@@@00003H

@@@@POWER@@@@@@@@@@00007H

2Press the PAUSE/SEARCH button, the normal screen is displayed.

NOTE:

•If the MENU RESET button is pressed while the (POWER FAILURE) and (DEW) menu is displayed, the

data is erased. The (USED TIME) data cannot be reset. “@” will be erased from the digital display.

English

39

Image 40

Contents SRT-2400DC Precautions For the customers in CanadaPrecautions Moisture Condensation ProblemsLocation Avoiding Electrical Shock and FireContents FeaturesLocations of Controls and Indicators Front PanelOperation Indicators Locations of Controls and IndicatorsDigital Display Back Panel Wvut Q O NBack Panel With the optional RS-485 board DC power source output DC power maximum cord Lengths About the memory resetConnections ON-SCREEN Menus ON-SCREEN Menus Setting the Language and Clock Language SettingClock setting Setting procedure is now completedSetting the Language and Clock Automatic Daylight Saving Time AdjustmentChanging the ON-SCREEN Display Selecting the On-screen DisplayChanging the Date/Time Display Position Date and time are displayedVideo Cassette Tapes Setting the Action to Take When a Cassette is Loaded Setting the Type of Tape UsedVideo Cassette Tapes Correct tape thread check functionTape Management Function OperationIf no tape management data is present on the tape If tape management data is present on the tapeSetting the Tape Management Function Tape Management FunctionTape Management Conflict Display Conflict display sampleRecording Speed Mode When Tape in the SET UP 5 menu is set to T-160When Tape in the SET UP 5 menu is set to T-120 Normal RecordingNormal Recording Concerning the Number of Times Tapes can be Rerecorded onRecord Pause Recording CheckChanges to the Recording Speed Mode During Recording Action to Take when the Video Signal DeterioratesSetting the Mode at the End of the Tape Tape Counter NotesAutorepeat Recording Repeat indicator will lightAutorepeat Recording Alarm Recording Setting Alarm RecordingAlarm Mode setting is flashing Alarm Recording Counter Display Alarm RecordingChecking the Alarm Recordings Time Alarm Search Alarm ScanProgram Timer Recording Program Timer Recording Day of the week of the 8th line is flashingSetting the Holidays Changing a Program Timer RecordingTo Cancel a Program Timer Recording To Cancel all Program Timer RecordingsThese portions will not be recorded Series Recording Setup Recording will start in series recording modeSeries Recording Series recording connectionsSeries Recording Continous Loop Recording SetupLoop recording connection example with 2 VCRs Normal Playback Normal PlaybackTracking Control Vertical Lock ControlSpecial Playback Picture Search Forward and ReverseStill Image Field AdvanceSetting the Security Lock DAY/TIME SearchDay/Time Search Search 01 0000 will be displayed on screenClock Adjustment Setting the BuzzerSetting procedure on the first VCR is now completed Setting the Cassette Eject Mode Cassette Eject SetupEject terminal connection Eject in terminalSettings for RS485 Terminals USE Address setting is flashing@@@@POWER@FAILURE Tape END OUT Terminal Output Setting SW OUT Terminal Output SettingOutput Terminals Tape END OUT TerminalSeries OUT/NON REC OUT terminal setting Alarm IN/CLOCK in and Alarm OUT/CLOCK OUT terminal settingInput Output setting is flashing Output TerminalsRemote Jack Remote control settingCOM Terminal Output Terminals Maintenance Maintenance Table MaintenanceMaintaining and Checking The Mechanism After a Power Failure Troubleshooting GuideSystem Down Specifications Sanyo Industrial VCR Warranty Weekdays 830 AM 500 PM Pacific TimeNU4QG/NA3 SRT-2400DC GB Mon. Sept., 17/2001