Sanyo SRT-2400DC Alarm Recording Counter Display, Checking the Alarm Recordings Time

Page 26

NU4QG/NA3 (SRT-2400DC GB) Mon. Sept., 17/2001

ALARM RECORDING

Alarm Recording Counter Display

•During alarm recording, “AL” will be flashing on the digital display.

•If the ON SCREEN switch is set to the “ON” position, the number of alarms will flash on the monitor screen.

•The maximum display number of alarm recordings is “999”, at the next alarm recording the counter will indicate “000”.

•When the (ALARM TIME) menu is displayed, press the MENU RESET button to reset the alarm counter to “000” (all the data of the (ALARM TIME) menu is reset).

Connections to the ALARM IN/CLOCK IN and ALARM OUT/CLOCK OUT Terminals

•Alarm input signal

Connect a make-contact (no voltage) switch between the ALARM IN/CLOCK IN and COM terminals.

•Alarm output signal

Normally DC 5V are output between the ALARM OUT/CLOCK OUT and the COM terminals. When an alarm input (trigger) is received and the unit is recording, the output falls to 0V. Once the alarm recording is over, the output returns to DC 5V.

Checking the Alarm Recordings Time

1Press the MENU button until the (ALARM TIME) menu is displayed.

°The number of alarm recordings, and the 8 most recent alarm recording times are displayed.

@@@@@@<ALARM@TIME>

@@@@008@12-25@19:00

@@@@@@@@11-25@23:00

@@@@@@@@11-25@15:00

@@@@@@@@10-25@08:00

@@@@@@@@10-25@06:00

@@@@@@@@09-25@20:00

@@@@@@@@09-25@16:35

@@@@@@@@09-25@10:52

NOTE:

•The data for the previous alarm recordings is erased.

2Press the PAUSE/SEARCH button, the normal screen is displayed.

NOTE:

•If the MENU RESET button is pressed while the (ALARM TIME) menu is displayed, the displayed data is erased.

“AL” will be erased from the digital display.

English

25

Image 26

Contents SRT-2400DC Precautions For the customers in CanadaLocation PrecautionsMoisture Condensation Problems Avoiding Electrical Shock and FireContents FeaturesLocations of Controls and Indicators Front PanelDigital Display Locations of Controls and IndicatorsOperation Indicators Back Panel Wvut Q O NBack Panel With the optional RS-485 board Connections About the memory resetDC power source output DC power maximum cord Lengths ON-SCREEN Menus ON-SCREEN Menus Clock setting Setting the Language and ClockLanguage Setting Setting procedure is now completedSetting the Language and Clock Automatic Daylight Saving Time AdjustmentChanging the Date/Time Display Position Changing the ON-SCREEN DisplaySelecting the On-screen Display Date and time are displayedVideo Cassette Tapes Video Cassette Tapes Setting the Action to Take When a Cassette is LoadedSetting the Type of Tape Used Correct tape thread check functionIf no tape management data is present on the tape Tape Management FunctionOperation If tape management data is present on the tapeSetting the Tape Management Function Tape Management FunctionTape Management Conflict Display Conflict display sampleWhen Tape in the SET UP 5 menu is set to T-120 Recording Speed ModeWhen Tape in the SET UP 5 menu is set to T-160 Normal RecordingRecord Pause Normal RecordingConcerning the Number of Times Tapes can be Rerecorded on Recording CheckChanges to the Recording Speed Mode During Recording Action to Take when the Video Signal DeterioratesSetting the Mode at the End of the Tape Tape Counter NotesAutorepeat Recording Repeat indicator will lightAutorepeat Recording Alarm Mode setting is flashing Alarm RecordingAlarm Recording Setting Checking the Alarm Recordings Time Alarm RecordingAlarm Recording Counter Display Alarm Search Alarm ScanProgram Timer Recording Program Timer Recording Day of the week of the 8th line is flashingTo Cancel a Program Timer Recording Setting the HolidaysChanging a Program Timer Recording To Cancel all Program Timer RecordingsThese portions will not be recorded Series Recording Series Recording SetupRecording will start in series recording mode Series recording connectionsLoop recording connection example with 2 VCRs Continous Loop Recording SetupSeries Recording Tracking Control Normal PlaybackNormal Playback Vertical Lock ControlStill Image Special PlaybackPicture Search Forward and Reverse Field AdvanceDay/Time Search Setting the Security LockDAY/TIME Search Search 01 0000 will be displayed on screenSetting procedure on the first VCR is now completed Setting the BuzzerClock Adjustment Eject terminal connection Setting the Cassette Eject ModeCassette Eject Setup Eject in terminalSettings for RS485 Terminals USE Address setting is flashing@@@@POWER@FAILURE Output Terminals Tape END OUT Terminal Output SettingSW OUT Terminal Output Setting Tape END OUT TerminalInput Output setting is flashing Series OUT/NON REC OUT terminal settingAlarm IN/CLOCK in and Alarm OUT/CLOCK OUT terminal setting Output TerminalsCOM Terminal Remote control settingRemote Jack Output Terminals Maintenance Maintaining and Checking The Mechanism MaintenanceMaintenance Table System Down Troubleshooting GuideAfter a Power Failure Specifications Sanyo Industrial VCR Warranty Weekdays 830 AM 500 PM Pacific TimeNU4QG/NA3 SRT-2400DC GB Mon. Sept., 17/2001