NU4QG/NA3
PROGRAM TIMER RECORDING
Setting the Holidays
By setting the holidays, timer recording will be conducted on those days, as set for Sundays.
1Press the MENU button until the (HOLIDAY SET) menu is displayed.
2Press the l (or j) button to set the month of the holiday, then press the * button.
3Press the l (or j) button to set the day of the holiday.
4Press the * (or ]) button until the next line to set start flashing.
°Repeat steps 2 to 4 to set up to 20 holidays.
5Press the PAUSE/SEARCH button to save the settings.
NOTE:
•If setting holidays, be sure that a timer recording is set for Sunday. If not, this function will not operate.
•If a timer recording for Sundays is entered, the holidays timer recording will not function if the program timer recording mode is set to “N”.
•To erase a setting, follow the same procedure as above, but at step 2 and 3, enter
Changing a Program Timer Recording
1Press the MENU button until the (TIMER SET) menu is displayed.
2Press the * (or ]) button until the setting to correct is flashing.
3Press the l (or j) button to correct the setting.
4Press the PAUSE/SEARCH button to save the settings.
5Press the TIMER button.
To Cancel a Program Timer Recording
1Press the MENU button until the (TIMER SET) menu is displayed.
2Press the * (or ]) button until the “Y” corresponding to the timer recording to cancel is flashing.
3Press the l (or j) button to select “N”.
4Press the PAUSE/SEARCH button to save the settings.
5Press the TIMER button.
To Cancel all Program Timer Recordings
1Press the MENU button until the (TIMER SET) menu is displayed.
2Press the MENU RESET button.
°All programmed timer recordings are erased.
3Press the PAUSE/SEARCH button, the normal screen is displayed.
English | 29 |