Sanyo SRT-2400DC instruction manual Series Recording, Continous Loop Recording Setup

NU4QG/NA3 (SRT-2400DC GB) Mon. Sept., 17/2001

SERIES RECORDING

Continous Loop Recording Setup

A minimum of 2 units are required for continuous loop recording.

Example with 2 VCRs.

Under loop recording when the recording finishes on the first unit, the new recording will start on the second unit. When the recording finishes on the second unit, recording will start on the first unit.

1The SERIES OUT/CLOCK OUT terminal of VCR No.2 and the SERIES IN terminal No.1 should be connected (See diagram).

2Set the following items as indicated.

Item	VCR No.1	VCR No.2
Cassette tape	Loaded	Loaded
Operation mode	Stop	Stop
“TAPE END MODE” (in	REW	REW
(SET UP 3) menu)
“SERIES REC IN” (in	Y (YES)	Y (YES)
(SET UP 3) menu)
“OUTPUT” (in (SET UP	SERIES	SERIES
5) menu)
Security lock	Canceled	Set

3Press the REC button on VCR No.1.

°Recording will start in series recording mode.

4Set the security lock on VCR No.1.

Loop recording connection (example with 2 VCRs)

Video camera

NOTES:

•To avoid recording problems, the “TAPE END MODE” in (SET UP 3) menu should be set to “REW” for both units.

•In loop recording mode, the tape will be re-recorded over. If you need to keep the recorded infomation, please eject the tape after recording is complete and insert a new tape.

Monitor TV

		To			To
VCR No.1		VIDEO IN	VCR No.2		VIDEO IN
		jack			jack
ALARM OUT/ ALARM IN/	SERIES OUT/ SERIES SW	EJECT	ALARM OUT/ ALARM IN/	SERIES OUT/ SERIES SW	EJECT
CLOCK OUT CLOCK IN COM	NON REC OUT IN OUT	OUT IN	CLOCK OUT CLOCK IN COM	NON REC OUT IN OUT	OUT IN
WARNING TAPE			WARNING TAPE
OUT END OUT COM	COM		OUT END OUT COM	COM

DC12V IN		DC12V IN
			To
To COM		To COM	VIDEO OUT
terminal	To	terminal	jack
To	VIDEO OUT	To
	jack
		SERIES OUT
SERIES OUT
		terminal
terminal
	To
	SERIES IN		To
	terminal
			SERIES IN
			terminal

32 English