Code
F58
F59
F60
F62
F63
F64
F65
F66
F70
F71
Function Code Name
Endorser Mode
Endorser Print Position
Bar Code Reading 1 On/Off
Bar Code/Patch Reading Confirmation Tone
Bar Code Reader
Confirmation Tone
Omit Bar Code Reading on the Next Document Only
Bar Code Test
Partial Bar Code Reading On/Off
Length Checking On/Off
Omit Length Checking on the Next Document Only
Description
Allows you to display the current Endorser mode and/or change the Endorser mode. To change to Endorser mode, press any arrow key to toggle between the two available options and then press Enter.
Allows you to specify how far from the leading edge of the document the endorsement will appear. Press the Up arrow to increment the starting print position by 1 inch
(25 mm), press the Down arrow to decrement the starting print position by 1 inch (25 mm). Press the Right arrow to increment the starting print position by
Allows you to turn bar code reading on or off. Enter 1 to turn on or 0 to turn off and then press Enter.
Allows you to turn the bar code/patch reading confirmation tone on or off. Enter 1 to turn on or 0 to turn off and then press Enter.
Allows you to turn the confirmation tone on or off which informs you when the Bar Code Reader has successfully read a bar code document. Enter 1 to turn on or 0 to turn off and then press Enter.
Allows you to omit bar code reading on the next document scanned. Bar Code Reading will resume on subsequent documents. Enter 1 to turn on or 0 to turn off, then press Enter.
Allows you to perform a test to verify the operation of the Bar Code Reader. Enter the number of the bar code test you want to perform: 1=Evaluate; 2=Display; 3=%Kodak; or 4=%Norm, then press Enter.
Allows you to turn partial bar code reading on or off. Enter 1 if you want the scanner to read bar codes with a start character (and n characters beyond the start character that can be read) even if no end character is encountered. Enter 0 to turn off partial bar code reading off, then press Enter.
Allows you to turn length checking on or off which monitors the length of the document(s) scanned using predefined maximum allowable lengths. Enter 1 to turn on or 0 to turn off and then press Enter.
Allows you to omit length checking on the next document scanned. Length monitoring will resume on subsequent documents. Enter 1 to turn on or 0 to turn off, then press Enter.
|