Kodak A-61092 manual Code Function Code Name

Page 32

Code	Function Code Name
F40	All Document Printers
	On/Off
	(for Document Printers 1
	and 12)
F40	Print Head Position
	(for Super12 Document
	Printer)

F41	Primary DP1 On/Off

F42	Secondary DP1 On/Off

F43 Document Printer 12/

Super12 On/Off

F44 Omit Printing on the Next Document Only

F45	Print Test (for Document
	Printers 1 and 12)

F45	Print Test
	(for Super12 Document
	Printer)

Description

Allows you to turn all Document Printers (primary DP1, secondary DP1 and DP12) on or off. Enter 1 to turn on or 0 to turn off, then press Enter.

Allows you to change the print heads or clean the printer. This function can only be performed when the transport is off. Enter 1 to Change Heads or 2 to Clean Printer, then press Enter.

Allows you to turn the primary Document Printer 1 on or off. Enter 1 to turn on or 0 to turn off, then press Enter.

NOTE: If the Super12 Document Printer is installed, a message indicating “Unassigned Function” will be displayed.

Allows you to turn the secondary Document Printer 1 on or off. Enter 1 to turn on or 0 to turn off, then press Enter.

NOTE: If the Super12 Document Printer is installed, a message indicating “Unassigned Function” will be displayed.

Allows you to turn the Document Printer 12 or Super12 Document Printer on or off. Enter 1 to turn on or 0 to turn off, then press Enter.

Allows you to specify no information be printed on the next document scanned. Printing will resume on subsequent documents. Enter 1 to omit printing on the next document, or enter 0 to print on the next document then press Enter.

NOTE: If you enter F44 and then F45, the Omit Printing Status on Next Document will be cleared.

Allows you to test the position and print quality of all Document Printers installed. Enter the number of the print test you want to perform.

1=Print IA test	3=Shift test
2=Prime test	4=Standard test

This function can be done when the transport is off.

Allows you to test the position and print quality of the Super12 Document Printer. Enter the number of the print test you want to perform.

1=Mode Image — will print the current image for the level and mode you are in.

2=Test Pattern — will print a preloaded test image.

This function can be done when the transport is off.

NOTE: If you enter F44 and then F45, the Omit Printing Status on Next Document will be cleared.

A-61092 September 1999

4-7

Image 32

Contents User’s Guide Page Page Scanner features IntroductionScanner options September Rear view September Function Operating keys and indicatorsKey/Indicator Keys/Indicators Next Selecting the language display Getting StartedTurning on the scanner Calibrating the scanner Preparing documents for scanning Unsuccessful calibrationAdjusting the feed and separator roller Gap semi-automatic feeder onlyTurn the gap adjustment knob counterclockwise 2 1/2 turns Adjusting the feed shelf position semi Automatic feeder onlyFeed Shelf Label Adjusting the feed shelf side guidesSemi-automatic feeder only Adjusting the exit hopper side guides and end stop Changing the deflector Operating the Scanner OverviewSelecting a mode Temporary operating values Feeding documents using the semi- automatic feeder Feeding thick documents Feeding documents using the automatic feeder Using function codes Function CodesFunction code summary Footswitch OperationScanning EndorserSuper12 Document Printer Patch ReaderDescription CodeFunction Code Name F17 F18 F19 F20 F21 F22 F23 F34 F37 F38 F39 Code Function Code Name Enter F58 F59 F60 F62 F63 F64 F65 F66 F70 F71 F72 F73 F74 F75 F91 F92 F93 F94 F95 F96 F97 F98 F99 Maintenance Cleaning tasks Cleaning materials Replacement partsDaily maintenance procedures Cleaning the imaging guidesSeptember Roller cover Release lever Feed roller Separator roller Cleaning the feeder module and separator roller Cleaning the separator roller Cleaning the paper path Vacuuming inside the scanner September September Cleaning the cabinet Weekly maintenance proceduresCleaning the exposure lamp housings Monthly maintenance procedures Cleaning the air filterReplacement procedures Replacing the air filterReplacing the exposure lamps September Replacing the imaging guides Replacing the feeder module and separator roller Replacing the feeder moduleReplacing the separator roller Ordering replacement parts Ordering cleaning materials Operator Messages Description/Action Required Operator message listingCode Operator Message Displayed Code Code Code E281 E282 E285 E286 E291 E293 E294 E295 E296 E297 E298 Code Various messages Troubleshooting Trouble and remedy chartTrouble Probable CauseTrouble Clearing the document path Document pathClearing documents Feeder/horizontal transport area Imaging guide area Lower roller assembly area Vertical transport area Upper turn area Document exit area Accessories Imaging Station Lamps Supply Catalog # SuppliesSupply Catalog # Parts and tools Part/ToolUnited States and Canada Order Number All other regionsUsing the Bar Code Reader Bar code types Code TypeCharacter Set Available Characters in Set Start/Stop CharactersBar code placement Before you begin Enabling bar code reading Enabling the bar code confirma- tion tonePerforming a bar code test September Using the Evaluate option Static bar code evaluationSelect 1=EVALUATE Select either 1=Transport Off or 2=Transport OnUsing the Imaging Station Cutting line 12.5 mm Dynamic bar code evaluation Dimensional Fields Pass or Fail Evaluating test resultsReflectance Fields Grades a through F Grade Field Pass 31 to FailCause Problem TypeCommon Causes of Low Bar Code Ratings Field Using the Display option Using the %KODAK optionUsing the %NORM option September Using the Check Feeder / Check Stacker Using the check feederClearing jams in the check feeder Cleaning the check feeder Using the check stacker Using the Endorser Die stylesBefore you begin Changing the die drum Endorser Locking lever Latch Endorser rotates to the right Die Spring clip Pry off at this edge Changing the ink roller Setting the date and code number Selecting the Endorser mode Enabling Endorser Changing the print positionUsing the Footswitch Enabling the confirmation tone Footswitch Pressed actions Footswitch Pressed ActionFootswitch Released Action Footswitch Released actionsFootswitch Pressed Definition Using the Patch Reader Patch typesPatch code placement Positioning the Patch Reader Sensor Linked modes Appendix a Basic ConceptsModes Image addresses ∙ Enter Using the Next keyAssigning an image address Using Function Code F92 Indexing schemes Image address formatsSingle level indexing Two level indexing Image Address Three level indexing Three level offset indexing Controlling document level changes Level instructionDocument A G I N G