Kodak A-61092 manual Troubleshooting, Trouble and remedy chart, Probable Cause, Remedy

Page 62

7 Troubleshooting

Trouble and remedy chart

This chapter outlines some of the problems you may encounter and their probable causes and remedies.

Trouble

Scanner does not power on (status display does not illuminate).

Documents not feeding properly.

Documents not stacking properly.

Probable Cause

The power cord is not connected.

The wall outlet is defective.

The main power switch is off.

The side panel switch is off.

The cabinet covers are not closed.

The feed and separator roller gap is not properly adjusted.

Feeding thick documents without using the gap release lever.

The feed and separator rollers may be dirty.

The feed shelf position is not properly adjusted.

The feed shelf side guides are not properly adjusted.

The exit hopper side guides are not properly adjusted.

The exit hopper end stop is not properly adjusted.

The wrong deflector is being used.

Remedy

Push the power cord plug into the receptacle.

Check the outlet (call an authorized electrician.)

Turn the main power switch on.

Turn the side panel switch on.

Check and close all the cabinet covers.

Refer to Chapter 2, “Adjusting the feed and separator roller gap”.

Refer to Chapter 2, “Adjusting the feed and separator roller gap”.

Refer to Chapter 5, “Cleaning the feed and separator rollers”.

Refer to Chapter 2, “Adjusting the feed shelf position”.

Refer to Chapter 2, “Adjusting the feed shelf side guides and end stop”.

Refer to Chapter 2, “Adjusting the exit hopper side guides and end stop”.

Refer to Chapter 2, “Adjusting the exit hopper side guides and end stop”.

Refer to Chapter 2, “Changing the deflector.”

A-61092 September 1999

7-1

Image 62

Contents User’s Guide Page Page Scanner features IntroductionScanner options September Rear view September Function Operating keys and indicatorsKey/Indicator Keys/Indicators Next Selecting the language display Getting StartedTurning on the scanner Calibrating the scanner Preparing documents for scanning Unsuccessful calibrationAdjusting the feed and separator roller Gap semi-automatic feeder onlyTurn the gap adjustment knob counterclockwise 2 1/2 turns Adjusting the feed shelf position semi Automatic feeder onlyFeed Shelf Label Adjusting the feed shelf side guidesSemi-automatic feeder only Adjusting the exit hopper side guides and end stop Changing the deflector Operating the Scanner OverviewSelecting a mode Temporary operating values Feeding documents using the semi- automatic feeder Feeding thick documents Feeding documents using the automatic feeder Using function codes Function CodesFunction code summary Scanning FootswitchOperation EndorserSuper12 Document Printer Patch ReaderDescription CodeFunction Code Name F17 F18 F19 F20 F21 F22 F23 F34 F37 F38 F39 Code Function Code Name Enter F58 F59 F60 F62 F63 F64 F65 F66 F70 F71 F72 F73 F74 F75 F91 F92 F93 F94 F95 F96 F97 F98 F99 Maintenance Cleaning tasks Cleaning materials Replacement partsDaily maintenance procedures Cleaning the imaging guidesSeptember Roller cover Release lever Feed roller Separator roller Cleaning the feeder module and separator roller Cleaning the separator roller Cleaning the paper path Vacuuming inside the scanner September September Cleaning the cabinet Weekly maintenance proceduresCleaning the exposure lamp housings Monthly maintenance procedures Cleaning the air filterReplacement procedures Replacing the air filterReplacing the exposure lamps September Replacing the imaging guides Replacing the feeder module and separator roller Replacing the feeder moduleReplacing the separator roller Ordering replacement parts Ordering cleaning materials Operator Messages Description/Action Required Operator message listingCode Operator Message Displayed Code Code Code E281 E282 E285 E286 E291 E293 E294 E295 E296 E297 E298 Code Various messages Trouble TroubleshootingTrouble and remedy chart Probable CauseTrouble Clearing the document path Document pathClearing documents Feeder/horizontal transport area Imaging guide area Lower roller assembly area Vertical transport area Upper turn area Document exit area Accessories Imaging Station Lamps Supply Catalog # SuppliesSupply Catalog # United States and Canada Order Number Parts and toolsPart/Tool All other regionsUsing the Bar Code Reader Character Set Bar code typesCode Type Available Characters in Set Start/Stop CharactersBar code placement Before you begin Enabling bar code reading Enabling the bar code confirma- tion tonePerforming a bar code test September Select 1=EVALUATE Using the Evaluate optionStatic bar code evaluation Select either 1=Transport Off or 2=Transport OnUsing the Imaging Station Cutting line 12.5 mm Dynamic bar code evaluation Dimensional Fields Pass or Fail Evaluating test resultsReflectance Fields Grades a through F Grade Field Pass 31 to FailCause Problem TypeCommon Causes of Low Bar Code Ratings Field Using the Display option Using the %KODAK optionUsing the %NORM option September Using the Check Feeder / Check Stacker Using the check feederClearing jams in the check feeder Cleaning the check feeder Using the check stacker Using the Endorser Die stylesBefore you begin Changing the die drum Endorser Locking lever Latch Endorser rotates to the right Die Spring clip Pry off at this edge Changing the ink roller Setting the date and code number Selecting the Endorser mode Enabling Endorser Changing the print positionUsing the Footswitch Enabling the confirmation tone Footswitch Pressed actions Footswitch Pressed ActionFootswitch Released Action Footswitch Released actionsFootswitch Pressed Definition Using the Patch Reader Patch typesPatch code placement Positioning the Patch Reader Sensor Linked modes Appendix a Basic ConceptsModes Image addresses ∙ Enter Using the Next keyAssigning an image address Using Function Code F92 Indexing schemes Image address formatsSingle level indexing Two level indexing Image Address Three level indexing Three level offset indexing Controlling document level changes Level instructionDocument A G I N G