NEC LCD1501 OSM On-Screen-Manager Controls, Brightness/Contrast Controls, Auto Adjust

Controls

OSM (On-Screen-Manager) Controls

The OSM controls on the front of the monitor function as follows:

To access OSM press any of the control buttons (<, >, -, +, EXIT).

Control	Menu
EXIT	Exits the OSM controls.
	Exits to the OSM main menu.
< / >	Moves the highlighted area left/right to select control menus.
	Moves the highlighted area up/down to select one of the controls.
-/+	Moves the bar left/right to increase or decrease the adjustment.
SELECT	Active Auto Adjust function. Enter the OSM controls.
	Enter the OSM sub menu.
RESET	Resets the highlighted control menu to the factory setting.
NOTE:	When RESET is pressed in the main and sub-menu, a warning window will appear allowing you to cancel the
	RESET function by pressing the EXIT button.

Brightness/Contrast Controls

BRIGHTNESS

Adjusts the overall image and background screen brightness.

CONTRAST

Adjusts the image brightness in relation to the background.

AUTO ADJUST

Adjusts the image displayed for non-standard video inputs.

Auto Adjust

Automatically adjusts the Image Position, the H. Size and Fine setting.

Position Controls

LEFT/RIGHT

Controls Horizontal Image Position within the display area of the LCD.

DOWN/UP

Controls Vertical Image Position within the display area of the LCD.

H. SIZE

Adjusts the horizontal size by increasing or decreasing this setting.

Should the “AUTO Adjust function” do not give you a satisfactory picture setting, a further tuning can be performed using the “H.Size” function (dot clock). For this a Moiré test pattern could be used. This function may alter the width of the picture. Use Left/Right Menu to center the image on the screen. If the H.Size is wrongly calibrated, the result would look like on the left drawing. The image should be homogeneous.

When H.SIZE value is	When H.SIZE value is	When H.SIZE value is
wrong.	improved.	correct.

English-6

01_English 6 12/9/02, 4:10 pm