3Lower the paper support into place so that it is now at an angle.
The paper support is inclined so the paper now remains in a neater stack in the standard exit bin.
Note: Do not leave the paper support inclined if you are printing transparencies. Doing so may cause creases in the transparencies.
Linking trays
Tray linking enables the automatic linking feature for trays when the same size and type of paper is loaded in multiple sources. By linking trays, you can create a larger capacity for output. When Tray 1 is empty, paper automatically feeds from Tray 2 to finish printing.
To set up tray linking:
•Load both Tray 1 and Tray 2 with the same paper size and type.
•From Print Properties, change the Paper source to Auto select.
38