Scanning
Automatic Document Feeder (ADF)
Use the Automatic Document Feeder (ADF) for
Scanner glass
Use the scanner glass for single pages, small items (such as postcards or photos), transparencies, photo paper, or thin media (such as magazine clippings).
Scanning a document using the computer
1Make sure the printer is connected to a computer, and both the printer and the computer are turned on.
2Load an original document faceup into the ADF or facedown on the scanner glass.
Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF. Place these items on the scanner glass.
3If you are loading a document into the ADF, adjust the paper guides.
4Click Start Programs or All Programs Lexmark Applications Presto! PageManager. The Presto! Scan Buttons dialog appears.
Note: If the Presto! Scan Buttons dialog does not appear, press F9.
5From the Presto! Scan Buttons toolbar, click the application to scan to.
6When the scan settings dialog appears, click Preview.
Note: If you are using the ADF, the Preview function is not supported. If you are using the scanner glass, you can preview one page at a time.
7Adjust the scan settings, and then click Scan.
55