Lexmark X500n, X502N PBX Access Digit, Default Mode, Auto Clear, Power Saver, Display Language

Page 92

	Menu item	Description
	PBX Access Digit	Specifies an outside line dispatch number
	xxx	Notes:
		Notes:
		•	9 is the factory default setting.
		•	Any number from 1–999 can be used.

	Default Mode	Specifies whether the printer will be in Fax mode or Copy
	Copy	mode following either of these two events:
	Copy	•
	Fax	•	The printer is turned on.
		•	The Auto Clear setting times out.
		Note: Copy is the factory default setting.

	Auto Clear	Sets whether the printer automatically returns to the Default
	Off	Mode setting after the set amount of time if no operation is
	Off	done during that time
	On	done during that time
	On
	30 sec	Notes:
	1 min.	•	On (30 sec) is the factory default setting.
	2 min.	•	On (30 sec) is the factory default setting.
	2 min.	•	Off disables the Auto Clear function.
	3 min.	•	Off disables the Auto Clear function.
	3 min.
	5 min.
	10 min.

	Power Saver	Sets the amount of time in minutes the printer waits after a job
	Off	is printed before it goes into a reduced power state
	Off
	On	Notes:
	Wait 1–240min	•	On (30 min.) is the factory default setting.
		•	On (30 min.) is the factory default setting.
		•	Lower settings conserve more energy, but may require
			longer warm-up times.
		•	Select the lowest setting if the printer shares an electrical
			circuit with room lighting or you notice lights flickering in
			the room.
		• Select a high setting if the printer is in constant use. Under
			most circumstances, this keeps the printer ready to print
			with minimum warm-up time.

	Display Language	Selects the language of the text appearing on the display
	ENGLISH
	FRENCH
	GERMAN
	ITALIAN
	SPANISH

	Country Code	Sets the country or region where the printer is being used
	<list of country codes>	Note: The Country Code must be set correctly for the fax
		function to work properly.

92

Image 92

Contents X500n, X502n Users GuidePage Contents Scanning PrintingCopying Faxing Clearing jamsAdministrative support Understanding printer menusUnderstanding printer messages Maintaining the printerTroubleshooting 117137 Safety information Basic model Configured modelsLearning about the printer Page Fully configured model Understanding the control panel Control panel item DescriptionControl panel item Description Control panel item Description Using an RJ11 adapter Getting the printer ready to faxChoosing a fax connection Country/regionPage Country/region Connecting directly to a telephone wall jack Connecting directly to a telephone wall jack in Germany Connecting to a telephone Connecting to an answering machine Page Connecting to a computer with a modem Setting the outgoing fax name and number Setting the dateSetting the time Installing options Installing a 530-sheet drawerSecuring the 530-sheet drawer to the printer Attaching cables Ethernet port USB symbol USB port Loading paper and specialty media Loading traysPage Page Converting the standard tray to a legal-size tray Page Page Setting the Paper Type Setting up the standard exit binLinking trays Paper guidelines Paper characteristicsPaper and specialty media guide Using letterhead Unacceptable paperSelecting paper Selecting preprinted forms and letterheadUsing transparencies Using envelopesUsing labels Using card stock Storing paperSupported paper sizes, types, and weights Supported paper sizesSupported paper types Supported paper weights Paper capacitiesPage Installing printer software Printing the configurationPrinting Printing a document from WindowsCanceling a print job Printing the demoClick the trash icon Customizing copy settings CopyingMaking a copy Selecting a paper tray for copiesSelecting a paper size for copies Reducing or enlarging copiesMaking a copy lighter or darker Adjusting copy qualityCopying multiple pages onto a single sheet Collated Not collated Canceling a copy jobCollating copies Scanning a document using the computer ScanningScanning text for editing Customizing scan settings using the computerScanning documents directly to other applications General tab Select Moire Reduction Scanning clear images from magazines or newspapersScanning to a computer over the network Setting up the scan directory Canceling a scan jobCustomizing scan settings from the control panel Searching the scan directoryMaking a scanned image lighter or darker Sending a fax Sending a fax using the ADFFaxing Sending a broadcast fax Sending a fax using the scanner glassCanceling a broadcast fax Sending a fax at the end of a conversation Canceling a fax jobSending a fax while listening to a call On Hook Dial Setting the fax receive mode Receiving a faxUnderstanding the fax receive modes Receiving a fax at the end of a conversationAdjusting fax activity report settings Setting up Quick Dial numbersPrinting fax activity reports Receiving a fax from an extension telephonePrinting the Speed Dial list Setting up Speed Dial numbersPrinting the Quick Dial list Customizing dial settings Setting the dialing modeAdjusting the volume Understanding the dialing optionsSetting up to fax while behind a PBX Making a fax lighter or darker Customizing fax settingsChanging the fax resolution Reducing the print size of an incoming fax Setting up real time fax transmissionSelecting a paper tray for incoming faxes Understanding jam messages and locations Clearing jamsAvoiding jams ADF door Rear door topRear door bottom Optional 530-sheet tray TrayClearing Tray 1 jams Page Clearing Tray 2 jams Clearing jams behind the rear door Paper jam in the ADF Paper Jam B Paper Jam CPage Page Close the ADF cover Press Copy Settings menu Scan Settings Fax Settings Fax Directory Admin SettingsUnderstanding printer menus Menus listSort QualityDensity Reduce/EnlargeScan Settings menu Limitation of size of mail Fax Settings menuTX Settings Delete Document RX SettingsTray Settings Comm Settings Report SettingsFax Directory menu Quick Dial EntryMachine Settings menu Speaker VolumePaper Settings Speed Dial EntryJob Timeout Toner Saver ModeSupplies Info Scanner CarriageNetwork Settings menu Reports Print menuAdmin Settings menu PBX Access Digit Default ModePower Saver Auto ClearSetting Default Admin Menu LockList of status and error messages Understanding printer messagesCover Open Close OPC Cover Missing Install Fuser Unit Place Next Page Then Press Set Sleep Cleaning the printer Cleaning the exterior of the printerMaintaining the printer Storing suppliesCleaning the scanner glass 100Cleaning the dust-proof glass 101102 103 104 105 106 Ordering suppliesOrdering toner cartridges Moving the printer Ordering a fuserOrdering a photodeveloper cartridge Ordering a waste toner bottleLocking the scanner 108Removing the printer from the 530-sheet drawer 109110 111 112 Setting the printer up in a new locationMoving the printer to another location 113 Administrative support Locking the administrator menusChanging the administrator menus password Adjusting Power Saver115 Restoring factory default settingsSetting the Default mode 116 Using the Embedded Web ServerTurning on Auto Clear Troubleshooting Solving printing problemsOnline customer support Checking an unresponsive printer Control panel display is blankUnexpected page breaks occur Job takes longer than expected to printTray linking does not work Solving copy problems Copier does not respondScanner unit does not close Poor copy qualityPartial document or photo copies Solving scan problems Scanner does not respondScan was not successful Scanning takes too long or freezes the computerSolving fax problems Partial document or photo scansCannot scan from a computer Cannot send or receive a faxReview this digital phone service checklist Temporarily disable Call WaitingDo you have Voice Mail service? Check the printer connectionsCan send but not receive faxes Can receive but not send faxes Received fax has poor print qualitySolving option problems DrawersSolving paper feed problems Solving print quality problemsPaper frequently jams Paper jam message remains after jam is clearedSmeared vertical print Color misregistrationLight colored line, white line, or incorrectly colored line Streaked horizontal lines Streaked vertical linesMake sure the Color Adjustment settings are not too light Check the Media Type settingPrint is too light Print irregularitiesGray background Print is too darkTransparency print quality is poor Uneven print density Ghost imagesIncorrect margins Skewed printBlank pages Clipped imagesIs the toner cartridge defective or empty? 133Toner specks Solid color pagesPaper curl FAQ about color printing What is RGB color?Toner rubs off 135Contacting Customer Support 136Edition notice 137Industry Canada compliance statement 138European Community EC directives conformity 139Noise emission levels 140141 New Zealand Telecom equipment notice 142Power consumption 143Off mode 144Extent of limited warranty 145Symbols IndexNumerics 146147 148 149 150

Related manuals

Manual 18 pages 22.73 Kb