3Press or repeatedly until Density appears, and then press .
4Press or repeatedly to adjust the density, and then press .
5Press to return to the Ready state.
Note: Copy density can also be temporarily changed by pressing the Lighter/Darker button on the control panel. When the printer power is reset, the printer returns to the default settings.
Collating copies
If you print multiple copies of a document, you can choose to print each copy as a set (collated) or to print the copies as groups of pages (not collated).
Collated | Not collated |
1Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF. Place these items on the scanner glass.
2If you are loading a document into the ADF, adjust the paper guides.
3From the control panel, press .
4Use the keypad to enter the number of copies.
5Press .
6 Press or repeatedly until Copy Settings appears, and then press .
7Press or repeatedly until Sort appears, and then press .
8Press or repeatedly until On appears, and then press .
9Press to return to the Ready state.
10Press to start copying in black and white, or press to start copying in color.
Canceling a copy job
To cancel a copy job, press at any time.
Note: If the copy job continues to print, part of the job may have already been transmitted to the printer buffer before the stop command was sent. Cancel Copy Job appears on the display, and the remaining buffered pages are printed before the job is canceled.
54