Copying Procedure
NOTE: If a problem, such as a document jam or memory full error, occurs while scanning multiple documents, the job is canceled and the scanned data deleted. To resume the same operation, load all the documents again and press the <Start> button.
NOTE: If the memory full error occurs, delete unnecessary files.
5.Confirm the Copy Job in the Job Status
1.Press the <Job Status> button on the control panel to display the Job Status screen.
The queued copy job will be displayed. If there is no copy job in progress, the following message is displayed: “No Active Jobs”.
Stop the Copy Job
Follow the steps below to manually cancel an activated copy job.
1.Press the <Stop> button on the
control panel to cancel the current copy job.
2.If required, press the <Job Status> button on the control panel to display the Job Status screen. To exit the Job Status screen, press the <Job Status> button.
<Stop> button
<Job Status> button | <Select> button |
3.Select [Stop (Delete)] using the <Select> button to clear the suspended job.
Xerox CopyCentre/WorkCentre 118 Quick Reference Guide | 49 |