Paper Jams
Paper Jams
When paper jams inside the machine, the machine stops, sounds an alarm, and displays a message on the screen. Follow the instructions on the display and remove the jammed paper.
Gently remove the paper taking care not to tear it. If paper is torn while it is being removed from the machine, remove all the torn pieces making sure that none remain inside. If a paper jam message is displayed again, paper is probably jammed at another location. Clear this by following the message on the screen.
When you have finished clearing a paper jam, printing automatically resumes from the point before the paper jam occurred.
NOTE: When removing jammed paper, make sure that no bits of paper are left in the machine, since they could cause more jams or overheat the paper. If a piece of paper is stuck in a hidden area or wrapped around the fuser unit or rollers, do not remove it forcibly; you could get injured or burned. Switch off the machine immediately, and contact the Xerox Welcome Center.
This section describes how to clear paper jams in the following locations.
Document Feeder
Cover
Cover A
Cover D (Optional)
A
| D |
Tray 5 (Bypass Tray) |
|
Cover B | B |
| C |
Cover C |
|
Document Exit
Exit
Tray 1
Tray 2 (Optional)
Tray 3 (Optional)
Tray 4 (Optional)
Paper Jams in Cover A – page 86 Paper Jams in Cover B – page 88 Paper Jams in Cover C – page 88 Paper Jams in Cover D – page 89 Paper Jams in Exit – page 89
Paper Jams in Trays 1, 2, 3, and 4
Xerox CopyCentre/WorkCentre 118 Quick Reference Guide | 85 |