IBM N2800e manual Industry Canada Compliance Statement

Page 74

International Business Machines Corporation

New Orchard Road

Armonk, NY 10504

Telephone: 1-919-543-2193

Industry Canada Compliance Statement

This Class B digital apparatus meets the requirements of the Canadian Interference-Causing Equipment Regulations.

Avis de conformité à la réglementation d’Industrie Canada

Cet appareil numérique de la classe B respecte toutes les exigences du Réglement sur le matériel brouilleur du Canada.

European Community Compliance Statement

This product is in conformity with the protection requirements of EC Council Directive 89/336/EEC on the approximation of the laws of the Member States relating to electromagnetic compatibility. IBM cannot accept responsibility for any failure to satisfy the protection requirements resulting from a non-recommended modification of the product, including the fitting of non-IBM option cards.

This product has been tested and found to comply with the limits for Class B Information Technology Equipment according to CISPR 22 / European Standard EN 55022. The limits for Class B equipment were derived for typical residential environments to provide reasonable protection against interference with licensed communication devices.

Properly shielded and grounded cables and connectors (IBM part number 75G5958 or its equivalent) must be used in order to reduce the potential for causing interference to radio and TV communications and to other electrical or electronic equipment. Such cables and connectors are available from IBM authorized dealers. IBM cannot accept responsibility for an interference caused by using other than recommended cables and connectors.

64

Image 74
Contents N2800e Thin Client Express Reference September Page N2800e Thin Client Express Reference September Page Contents Glossary of abbreviations Safety notices Handling static-sensitive devices Who should read this book How to send your commentsAbout this book Information available on the World Wide WebViii Understanding your NetVista Thin Client Express Page Standard hardware Hardware connectorsLearning about the hardware Upgrading hardware features Monitor specificationsPower consumption Communication hardwareLearning about the hardware Page Unpacking your hardware Setting up the hardwareInstalling options Selecting the voltage for your locationInstalling the support base Connecting your hardwareStartup sequence Page Configuring the N2800e Thin Client Express Using the Setup Utility to configure the workstationUsing the Configuration Tool to configure the workstation Configuring the N2800e Thin Client Express Page Copyright IBM Corp Click NetVista thin client Page Page Managing your Thin Client Express remotely Page Preparing the workstation for PPP dialer configuration Prerequisites for using PPP dial accessConfiguring a workstation for PPP dialer PPP dialer for Thin Client Express workstationsConfiguring initial modem settings for PPP dialer access Learning about the NC dialer window Maintaining and reconfiguring PPP dialer parametersStarting the PPP dialer Using the PPP dialer to access flash images Troubleshooting PPP dialer problemsPerforming a software update on a workstation Altering the flash image of a workstationRecovering the flash image of a workstation Click Configure Software Update Server AccessEnabling peer flash recovery on a workstation Recovering the image on the peer-booted workstation Disabling peer flash recovery on a workstation NS/flashbase/x86/kernel.2200 Startup Visible Resolving hardware problemsVerifying hardware problems Visible hardware failure Hardware problem indications Where to find informationSymptom What you should do Logic Unit Symptom What you should do MouseAudio beep sequences Symptom What you should do System LED Memory errorVideo memory error LED indicationsError codes and text messages Monitor LEDNon-volatile memory messages Nvram NSB11xxx Battery messages NSB01xxxMain memory messages NSB10xxx Audio messages NSB21xxxCompactFlash card messages NSB51xxx Error code Error message What you should doUSB messages NSB4xxxx Ethernet messages NSB62xxxNetwork communication messages NSB8xxxx Bootp messages NSB72xxxBoot file server messages NSB83xxx Tftp messages NSB81xxxSubnet mask messages NSB86xxx Gateway messages NSB84xxxClient IP address messages NSB85xxx IP address messages NSB87xxxAppendix A. Replacing hardware parts Replacing the N2800e Thin Client Express CompactFlash cardKeyboards Replacing parts other than the N2800e CompactFlash cardMemory Voltage Selection Plug Receptacle Country Part number Returning hardware parts Reassembling the thin client Appendix B. Hardware maintenance proceduresRemoving the logic unit to install parts Installing an optional PCI card Replacing a CompactFlash cardExchanging the lithium battery Exchanging the memoryRemoving the power supply Installing the power supply Page Selecting the voltage for your location Page Appendix D. Recovering the boot block image Creating a recovery CompactFlash cardRecovering the flash image Appendix E. Choosing a flash file BOM file Languages supportedPage Appendix F. Monitor specifications Page Pin Signal Appendix G. Connector pin informationPin Signal Signal Direction Pin # Voltage+5V dc Pin Name FunctionPin # Direction Description Copyright IBM Corp Environmental Design Product Recycling and DisposalFederal Communications Commission FCC Statement TrademarksElectronic Emission Notices Industry Canada Compliance Statement Glossary of abbreviations Page Index N2800e understanding Please tell us how we can improve this book Readers’ Comments We’d Like to Hear from YouHow satisfied are you that the information in this book is Readers’ Comments We’d Like to Hear from You Page SA23-2808-00