Cisco EtherSwitch Service Modules Feature Guide
How to Configure the Cisco EtherSwitch Service Module
| Command or Action | Purpose |
Step 2 |
|
|
Performs a hardware reset of the Cisco EtherSwitch service | ||
|
| module. |
| Example: |
|
| Router# |
|
Step 3 |
|
|
Performs a graceful halt and reload of the Cisco | ||
|
| EtherSwitch service module operating system. |
| Example: |
|
| Router# |
|
| reload |
|
|
|
|
Examples
This section provides the following examples:
•Sample Output for the
•Sample Output for the
•Sample Output for the
Sample Output for the
The following example shows what appears when you enter the
slot/unit shutdown command:
Router# service-module gigabitethernet1/0 shutdown
Shutdown is used for Online removal of Service Module.
Do you want to proceed with shutdown?[confirm]
Use
Note At the confirmation prompt, press Enter to confirm the action or n to cancel.
Sample Output for the
The following example shows what appears when you enter the
slot/unit reset command:
Router# service-module gigabitethernet1/0 reset
Use reset only to recover from shutdown or failed state
Do you want to reset?[confirm]
Note At the confirmation prompt, press Enter to confirm the action or n to cancel.
Sample Output for the
The following example shows what appears when you enter the
slot/unit reload command:
Router# service-module gigabitethernet1/0 reload
Do you want to proceed with reload?[confirm]
Note At the confirmation prompt, press Enter to confirm the action or n to cancel.
Cisco IOS Release 12.2(25)SEC
49