Cisco Systems NME-16ES-1G Rename, Boot -x -v deviceimagename, Copy flash, Enable secret password

Cisco EtherSwitch Service Modules Feature Guide

Troubleshooting the Cisco EtherSwitch Service Module Software

	Command or Action	Purpose
Step 6
	rename	Renames the configuration file to config.text.old.
		• Before continuing to the next command, power up
	Example:	any connected stack members and wait until they
	Switch: rename flash:config.text	have completely initialized.
	flash:config.text.old
Step 7
	boot [-x] [-v] [device:][imagename]	Use the boot command to boot up an external process.
	Example:
	Switch: boot
Step 8
	copy flash:	Copies the configuration file into memory.
	Example:
	Switch: copy flash:config.text
	system:running-config
Step 9
	configure terminal	Enters global configuration mode.
	Example:
	Switch# configure terminal
Step 10
	enable secret password	Sets the password.
		• The secret password can be from 1 to 25
	Example:	alphanumeric characters.
	Switch(config): enable secret 5	• It can start with a number.
	$1$LiBw$0Xc1wyT.PXPkuhFwqyhVi0
		• It is case sensitive.
		• It allows spaces but ignores leading spaces.
Step 11
	exit	Returns you to privileged EXEC mode.
	Example:
	Switch(config): exit

Cisco IOS Release 12.2(25)SEC

74