Cisco Systems NME-16ES-1G Show ip interface brief, Control+shift+6, Disconnect, Show power inline

Cisco EtherSwitch Service Modules Feature Guide

How to Configure the Cisco EtherSwitch Service Module

	Command or Action	Purpose
Step 13
	enable	Enters privileged EXEC mode on the Cisco EtherSwitch
		service module.
	Example:
	Switch> enable
Step 14
	show ip interface brief	Displays brief version of the Cisco EtherSwitch service
		module configuration information.
	Example:
	Switch# show ip interface brief
Step 15
	control+shift+6 x	Returns you to the router console while keeping the
		console session to the switch intact.
	Example:
	Switch# control+shift+6 x
Step 16
	disconnect	Terminates the console session to the Cisco EtherSwitch
		service module.
	Example:
	Router# disconnect
Step 17
	show power inline	Displays the PoE statistics maintained on the Cisco
		EtherSwitch service module.
	Example:	Note	PoE statistics are updated dynamically.
	Router# show power inline
		Output of the show service-module status command
		must be in steady state for inline power to function.

Cisco IOS Release 12.2(25)SEC

38