Cisco Systems NME-16ES-1G manual Optional loadhelper filesystem/file-url

Cisco EtherSwitch Service Modules Feature Guide

Troubleshooting the Cisco EtherSwitch Service Module Software

SUMMARY STEPS

1.service-module interface slot/port session

2.dir flash:

3.service-module interface slot/port password-reset

4.flash_init

5.(Optional) load_helper filesystem:/file-url ...

6.rename

7.boot

8.copy flash:

9.configure terminal

10.enable secret password

11.exit

12.copy running-configuration startup-configuration

13.reload

DETAILED STEPS

	Command or Action	Purpose
Step 1
	service-module interface slot/port session	Connects to the service module and opens a Cisco
		EtherSwitch service module session.
	Example:
	Router# service-module gigabitethernet1/0 session
Step 2
	dir flash:	Displays a list of all files and directories in flash
		memory on the service module.
	Example:
	rommon> dir flash:
Step 3
	service-module interface slot/port password-reset	Enables password recovery.
	Example:
	Router# service-module gigabitethernet1/0
	password-reset
Step 4
	flash_init	Initializes the flash memory file system.
	Example:
	Switch: flash_init
Step 5
	load_helper filesystem:/file-url ...	Loads and initializes one or more helper images.
	Example:
	Switch: load_helper flash:xyz

Cisco IOS Release 12.2(25)SEC

73